[OpenWrt Wiki] Astoria Networks / Arcadyan ARV7519RW22-A-LT (Orange Livebox 2.1) (2024)

--------------------------------------- Area Address Length ---------------------------------------[0] Boot 0xB0000000 512K[1] Image 0 0xB1280000 6144K[2] Image 1 0xB1880000 6144K[3] Configuration 0xB1E80000 1024K[4] Boot Parameters 0xB1F80000 256K[5] Flash Image 0xB0000000 32768K[6] Linux Image 0xB0080000 24576K[7] Emergency Value 0xB1FC0000 2883584K---------------------------------------

Ordering the areas and pointing the start-end memory addresses we got:

 - Flash Image 0xB0000000-0xB2000000 32768K - Boot 0xB0000000-0xB0080000 |- 512K - Linux Image 0xB0080000-0xB1880000 |- 24576K - ?? 0xB0080000-0xB1280000 | |- 18432K - Image 0 0xB1280000-0xB1880000 | \- 6144K - Image 1 0xB1880000-0xB1E80000 |- 6144K - Configuration 0xB1E80000-0xB1F80000 |- 1024K - Boot Parameters 0xB1F80000-0xB1FC0000 |- 256K - Emergency Value 0xB1FC0000-0xB2000000 \- 256K (BRN-Boot shows 2883584K but it's impossible, only 256K left in flash)

It's wrong because it doesn't exactly match the real memory contents.

U-Boot OEM's env dumped from memory:

bootcmd=run flash_flashbootdelay=3baudrate=115200preboot=echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echobootfile="uImage"mem=62Mphym=64Methaddr=00:E0:92:00:01:40netdev=eth0console=ttyS0baudrate=115200tftppath=loadaddr=0x80800000rootpath=/mnt/full_fsrootfsmtd=/dev/mtdblock4addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):onaddmisc=setenv bootargs $(bootargs) console=$(console),$(baudrate) ethaddr=$(ethaddr) phym=$(phym) mem=$(mem) panic=1 mtdparts=$(mtdparts) init=/etc/preinit vpe1_load_addr=0x83e00000 vpe1_mem=2Mu-boot=u-boot.lqrootfs=rootfs.imgfullimage=fullimage.imgjffs2image=root.jffs2-128k.nortotalimage=totalimage.imgflash_flash=run flashargs addip addmisc; bootm $(f_kernel_addr)update_uboot=tftpboot $(loadaddr) $(tftppath)$(u-boot); erase b0000000 +40000; cp.b $(loadaddr) b0000000 $(filesize); resetupdate_kernel=tftpboot $(loadaddr) $(tftppath)$(bootfile); erase $(f_kernel_addr) +$(f_kernel_size); cp.b $(loadaddr) $(f_kernel_addr) $(filesize)update_rootfs=tftpboot $(loadaddr) $(tftppath)$(rootfs); erase $(f_rootfs_addr) +$(f_rootfs_size); cp.b $(loadaddr) $(f_rootfs_addr) $(filesize)update_fullimage=tftpboot $(loadaddr) $(tftppath)$(fullimage); upgrade $(loadaddr) $(filesize)mtdparts=ifx_nor0:256k(uboot),256k(uboot_bin),128k(uboot_cfg),2m(kernel),10m(rootfs),11m(rootfs2),896k(sys_config),6m(supertask_img),1m(supertask_cfg),512k(supertask_bootcfg)reset_uboot_config=prot off 0xB0080000 0xB009FFFF; erase 0xB0080000 0xB009FFFFpart0_begin=0xB0000000part1_begin=0xB0040000part2_begin=0xB0080000part3_begin=0xB00A0000part4_begin=0xB02A0000part5_begin=0xB0CA0000part6_begin=0xB11A0000part7_begin=0xB1280000part8_begin=0xB1E80000part9_begin=0xB1F80000total_part=10flash_end=0xB1FFFFFFdata_block0=ubootdata_block1=uboot_bindata_block2=ubootconfigdata_block3=kerneldata_block4=rootfsdata_block5=rootfs2data_block6=sysconfigdata_block7=supertask_imgdata_block8=supertask_cfgdata_block9=supertask_bootcfgtotal_db=10f_uboot_addr=0xB0000000f_uboot_size=0x00040000f_uboot_bin_addr=0xB0040000f_uboot_bin_size=0x00040000f_ubootconfig_addr=0xB0080000f_ubootconfig_size=0x00020000f_ubootconfig_end=0xB009FFFFf_kernel_addr=0xB00A0000f_kernel_size=0x00200000f_kernel_end=IFX_CFG_FLASH_KERNEL_IMAGE_END_ADDRf_rootfs2_addr=0xB0CA0000f_rootfs2_size=0x00500000f_sysconfig_addr=0xB11A0000f_sysconfig_size=0x000E0000f_ddrconfig_addr=0xB007FFE8f_ddrconfig_size=24f_supertask_img_addr=0xB1280000f_supertask_img_size=0x00c00000f_supertask_cfg_addr=0xB1E80000f_supertask_cfg_size=0x00100000f_supertask_bootcfg_addr=0xB1F80000f_supertask_bootcfg_size=0x00080000update_jffs2image=tftpboot $(loadaddr) $(tftppath)$(jffs2image); erase $(f_rootfs_addr) +0x0ce0000; upgrade $(loadaddr) $(filesize)update_flash=tftp $(loadaddr) flash2.img; protect off b0800000 +800000; erase b0800000 +800000; cp.b $(loadaddr) b0800000 800000; tftp $(loadaddr) flash1.img; protect off b0000000 +800000; erase b0000000 +800000; cp.b $(loadaddr) b0000000 800000sw_version=01-01-101t1hw_version=VR9serial=00000000ethact=vr9 Switchfilesize=760040fileaddr=80800000ipaddr=192.168.2.1serverip=192.168.2.100f_rootfs_size=0x00760000f_rootfs_addr=0xb02a0000f_rootfs_end=0xb0a00000f_rootfs_crc=CCB93F36stdin=serialstdout=serialstderr=serialflashargs=setenv bootargs root=$(rootfsmtd) rw rootfstype=squashfs,jffs2 calibrate


Ordering the areas and pointing the start-end memory addresses we got:

 - Flash Image 0xB0000000-0xB2000000 32768K - uboot 0xB0000000-0xB0040000 |- 256K - uboot-bin 0xB0040000-0xB0080000 |- 256K - ddrconfig 0xB007FFE8-0xB0080000 | \- 24B - ubootconfig 0xB0080000-0xB00A0000 |- 128K - kernel 0xB00A0000-0xB02A0000 |- 2048K - rootfs 0xB02A0000-0xB0CA0000 |- 10240K - rootfs2 0xB0CA0000-0xB11A0000 |- 5120K - sysconfig 0xB11A0000-0xB1280000 |- 896K - supertask_img 0xB1280000-0xB1E80000 |- 12288K - supertask_cfg 0xB1E80000-0xB1F80000 |- 1024K - supertask_bootcfg 0xB1F80000-0xB2000000 \- 512K
ARV7519RW22-A-LT Flash Layout
Layer0 MX29GL256EL-90TIP NOR Flash 32768KiB
Layer1 mtd0 mtd1 mtd2 mtd3 mtd4 mtd5 mtd6 mtd7 mtd8 mtd9
Size in KiB 256KiB 256KiB 128KiB 2048KiB 10240KiB 5120KiB 896KiB 12288KiB 1024KiB 512KiB
Name uboot uboot-bin ubootconfig kernel rootfs rootfs2 sysconfig supertask_img supertask_cfg supertask_bootcfg
mountpoint none none none none none none none none none none
filesystem none none none none none none none none none none

Despite the argument in U-Boot OEM, analyzing OpenWrt OEM mtd dumps there is a little difference.

mtd5 (rootsfs2) area is 00CA0000-017A0000 and mtd6 (sysconfig) area is 017A0000-01880000, the other ones match the U-Boot OEM argument.

Please read the article flash.layout for a better understanding. It contains a couple of explanations. Then let's have a quick view at flash layout of this particular device:

ARV7519RW22-A-LT Flash Layout
Layer0 MX29GL256EL-90TIP NOR Flash 32768KiB
Layer1 mtd0 mtd1 mtd2 firmware 31744KiB mtd6
Layer2 mtd3 mtd4 rootfs
mountpoint /
filesystem overlayfs
Layer3 mtd5
Size in KiB 384KiB 128KiB 512KiB
Name uboot uboot-env kernel rootfs_data boardconfig
mountpoint none none none /rom /overlay none
filesystem none none none SquashFS JFFS2 none
Architecture MIPS
Vendor Lantiq
bootloader BRNBoot
System-On-Chip Lantiq VRX288 v1.1/v1.2 (MIPS, PSB 80920 EL)
CPU/Speed 34Kc 500 MHz
Flash-Chip MX29GL256EL-90TIP
Flash size 32 MiB
RAM EM68C16CWVB-25H 128 MiB
WAN 1x RJ45 1 Gb Lantiq PEF7071V v1.5 connected on VRX288 internal switch
Modem Infineon/Lantiq PSB80208V
Wireless Xwave 300 Lantiq PSB8231 11 bgn 1a30:0710 (rev 01)
Ethernet 4x RJ45 10/100 VRX288 internal switch
Internet ADSL2+
Phone Lantiq PEF 42068
USB Yes 2 x 2.0
Serial Yes
JTAG No

Casing

Board

Warning: Don't connect the Vcc pin of the serial port to a TTL-to-USB adapter. While doing this, some people damaged the board. There's no need to connect it, communication works without Vcc.

Serial connection parameters
for ARV7519RW22-A-LT
115200, 8N1, 3.3V

Credits to: http://www.redeszone.net/

To access different Bootloader “mode” short pin when bootloader checks images integrity like the picture below and remove it after:

Image Check from FLASH_AREA_IMAGE_0 : Failed.
Image Check from FLASH_AREA_IMAGE_1 : Failed.
To access Bootloader web page recovery tool (192.168.1.1 no DHCP) pass code: “Oh!123Go”.

Image Check from FLASH_AREA_IMAGE_0 : Failed.
Image Check from FLASH_AREA_IMAGE_1 : Failed.
Flash Checking Again - fw/ui... Failed.
Unzipping Tiny Kernel at 0x80002000 ... failed : 4 !!
To access Bootloader prompt

It's possible now to run a second loader (u-boot) and boot ramfs images or launch OpenWrt backfire image at flash 0xB00A0000 (jffs2 filesystem). (0 and J keys).

- boot_sel2 is at R148. Short circuit activates CFG 05 mode. (SPI flash boot).- boot_sel0 is at R155. Short circuit boot_sel2 and boot_sel0 enters CFG 04 UART mode.- boot_sel1 is currently unknown.- It seems there is a boot_sel3 pin at R147 ¿?.

Leds:

label color GPIO active
lan green 2 LOW
power green 14 LOW
alarm blue 15 LOW
internet red 10 LOW
orange 19 LOW
green 28 LOW
voice green 29 LOW

Buttons:

label GPIO active
reset 6 LOW
rfkill 33 LOW
wps 37 LOW

Other:

Description GPIO
PCIe RESET 21

ROM VER: 1.ROM VER: 1.0.5CFG 01Tuning DDR beginDDR Access auto data-eye tuning Rev 0.3aDDR size from 0xa0000000 - 0xa7ffffffDDR check ok... start booting...=======================================================================Wireless ADSL IAD VR9 Loader v0.70.01 build Mar 26 2012 13:36:53 Arcadyan Technology Corporation=======================================================================A1x VR90xbe22ff1c : 702400000xBf203014 : 70240000MXIC MX29GL256EL top boot 16-bit mode foundCopying boot params.....DONEEnter command mode ...Get Primary to 0.....Image Check from FLASH_AREA_IMAGE_0 : Passed.Unzipping firmware at 0x80002000 ... with AREA[1][ZIP 3] [ZIP 1] doneReady to run firmwareIn c_entry() function ...install_exceptionCo config = 80048483sys_irq_init ...IrqConnect : IRQ = 53, Handler = 0x80016364VR9 is not A21 chip !!!!, ifx_bsp_basic_mps_decrypt bfc01ea40xbf106a0b : 780xbf106a0b : 780xbf106a0c : 800xbf106a0c : 80##### _ftext = 0x80002000##### _fdata = 0x807F8A60##### __bss_start = 0x809478F4##### end = 0x8684C538allocate_memory_after_end> len 1371796, ptr 0x86854540##### Backup Data from 0x807F8A60 to 0x86854538~0x869A33CC len 1371796##### Backup Data completed##### Backup Data verified[GPIO FLOW] SetGpio() Begin ..ifx_gpio_init() !!!ifx_gpio_pre_init() !!![KERN_INFO]IFX GPIO driver, version 1.2.10, (c)2009 Infineon Technologies AGRegister LED MODULE OK!!Register BUTTON MODULE OK!![GPIO FLOW] SetGpio() End.[INIT] System Log Pool startup ...[INIT] MTinitialize ..CPU Clock 500000000 Hzmips_counter_frequency:250000000r4k_offset: 0x0003d090(250000)init_US_counter : time1 = 53 , time2 = 200080, diff 200027US_counter = 125set to constant US_counter = 112 cnt1 2040019 cnt2 2042856, diff 2837 cnt1 2886386 cnt2 2888186, diff 1800Runtime code version: 00.95.005System startup...[INIT] Memory COLOR 0, 10827424 bytes ..[INIT] Memory COLOR 1, 2097152 bytes ..[INIT] Memory COLOR 2, 13809456 bytes ..MXIC MX29GL128EL bottom boot 16-bit mode foundconsole_enable=0Set flash memory layout to Boot Parameters found !!!Bootcode version: v0.70.01Serial number: J217211009Hardware version: 0109.03.2012-18:10:13[BUILD-WPA]: Key:F5E161E66806[BUILD:PIN] PIN:J217211009, MAC:1CC63CXXXXXX[BUILD-PIN]: PIN:82852863, len=8[CONFIG] : default SSID = Orange-A37E[CONFIG] : default WPA/WPA2 PSK = 9E23A553[BUILD:PIN] PIN:J217211009, MAC:1CC63CXXXXXX[BUILD-PIN]: PIN:82852863, len=8[BUILD-PIN]: PIN:82852863, len=8!![E-CFG-READ] Special Configuration data reading error!!!![E-CFG-READ] Reset to factory defaults 1!!MXIC MX29GL128EL bottom boot 16-bit mode foundnLen:98, Magic:0x33343536my CFGVersionMagic = 33343536, old CFGVersionMagic on flash = 33343536my CFGsize = 370144, my CFGDescSize = 40454my Version = 00.95.005, Version on flash= 00.95.005[CONFIG] old cfg version:[00.95.005], [0.0.95.0.5.100]source CFGsize = 370144, CFGDescSize = 40454MXIC MX29GL128EL bottom boot 16-bit mode foundOldCfgHexSize:13069Unzipping from 81E1A588 to 81E10770 ... [ZIP 2] allocate_memory_after_end> len 81516, ptr 0x869a33f0doneUncompressed size = 40452Tail1 : END_III_Config_tSize of Old CFG_DESC is :40452!!!useCfgDesc:1MyCfgHexSize:13069Unzipping from 81E0D448 to 81E03630 ... [ZIP 2] doneUncompressed size = 40452My CFGDescSize:40454useCfgDesc:1Tail : END_III_Config_tuseCfgDesc:3Restore Config file from ver:00.95.005!!![CONFIG] DS_Tail:[t_ARV7519RW22][CONFIG] load_config ret=1[updateConfig] flash version:[00.95.005], [0.0.95.0.5.100][updateConfig] code version:[00.95.005], [0.0.95.0.5.100][CONFIG] : smtp_email_from = Orange-A37E@orange.es!!! Invalid wireless channel range 0 ~ 0!!! Use default value 1 ~ 13default route: 0.0.0.0[CheckUSBBackConf]Erase the garbage config in usbBackConf_sBufferInit:BUF_HDR_SZ=224 BUF_ALIGN_SZ=16 BUFFER_OFFSET=480BUF_BUFSZ0=576 BUF_BUFSZ1=4384NUM_OF_B0=0 NUM_OF_B1=6178BUF_POOL0_SZ=0 BUF_POOL1_SZ=28468224sizeof(BUFFER0)=800,sizeof(BUFFER1)=4608*BUF0=0x84779168 *BUF1=0x82c52d48Altgn *BUF0=0x84779180 *BUF1=0x82c52d60End at BUF0:0x84779180, BUF1:0x84779160BUF0[0]=0x84779180 BUF1[0]=0x82c52d60buffer0 pointer init OK!buffer1 pointer init OK![qm_lnk_init] CLOCKHZ=1000 ...[qm_lnk_init] add if 3 into QM link 0[qm_lnk_init] add if 4 into QM link 0[qm_cbq_enable] no QM attached[qm_cbq_detach] no QM is attached at link 0pkt_avgsz=250, pkt_maxsz=1600, mtu=1600f=10000000/100000, ns_per_byte=80000/1000ptime=2000000000/1000, cptime=0/1000, offtime=0/1000New cls: id=0, bw=80 ns/byte, maxd=0 ms, maxb=32, minb=2, avgpktsz=250, maxpktsz=1600, offtime=0, parent=0, borrow=0 pri=0, maxidle=31, minidle=-256, maxq=96, clsfg=17pkt_avgsz=1600, pkt_maxsz=1600, mtu=1600f=100000/100000, ns_per_byte=8000000/1000ptime=18446744073709551615/1000, cptime=0/1000, offtime=0/1000New cls: id=1, bw=8000 ns/byte, maxd=0 ms, maxb=16, minb=1, avgpktsz=1600, maxpktsz=1600, offtime=0, parent=8684812c, borrow=8684812c pri=5, maxidle=200, minidle=-25600, maxq=48, clsfg=21qm_cbq_attach(): cbqp->cbq_res=109pkt_avgsz=250, pkt_maxsz=1600, mtu=1600f=9900000/100000, ns_per_byte=80808/1000ptime=2000000000/1000, cptime=0/1000, offtime=0/1000New cls: id=2, bw=80 ns/byte, maxd=0 ms, maxb=32, minb=4, avgpktsz=250, maxpktsz=1600, offtime=0, parent=8684812c, borrow=8684812c pri=5, maxidle=31, minidle=-258, maxq=48, clsfg=21pkt_avgsz=250, pkt_maxsz=1600, mtu=1600f=1/100000, ns_per_byte=4294967295/1000[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflowptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000New cls: id=3, bw=1342177 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1600, offtime=1366279, parent=86846b2c, borrow=86846b2c pri=6, maxidle=0, minidle=-4294966, maxq=48, clsfg=20pkt_avgsz=250, pkt_maxsz=1600, mtu=1600f=1/100000, ns_per_byte=4294967295/1000[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflowptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000New cls: id=4, bw=1342177 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1600, offtime=1366279, parent=86846b2c, borrow=86846b2c pri=0, maxidle=0, minidle=-4294966, maxq=96, clsfg=21pkt_avgsz=250, pkt_maxsz=1600, mtu=1600f=1/100000, ns_per_byte=4294967295/1000[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflowptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000New cls: id=5, bw=1342177 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1600, offtime=1366279, parent=86846b2c, borrow=86846b2c pri=1, maxidle=0, minidle=-4294966, maxq=48, clsfg=23pkt_avgsz=250, pkt_maxsz=1600, mtu=1600f=1/100000, ns_per_byte=4294967295/1000[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflowptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000New cls: id=6, bw=1342177 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1600, offtime=1366279, parent=86846b2c, borrow=86846b2c pri=2, maxidle=0, minidle=-4294966, maxq=48, clsfg=23pkt_avgsz=250, pkt_maxsz=1600, mtu=1600f=1/100000, ns_per_byte=4294967295/1000[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflowptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000New cls: id=7, bw=1342177 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1600, offtime=1366279, parent=86846b2c, borrow=86846b2c pri=3, maxidle=0, minidle=-4294966, maxq=48, clsfg=23pkt_avgsz=250, pkt_maxsz=1600, mtu=1600f=1/100000, ns_per_byte=4294967295/1000[qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflowptime=2000000000/1000, cptime=18446744073709551615/1000, offtime=18446744073709551615/1000New cls: id=8, bw=1342177 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1600, offtime=1366279, parent=86846b2c, borrow=86846b2c pri=4, maxidle=0, minidle=-4294966, maxq=48, clsfg=23pkt_avgsz=250, pkt_maxsz=1600, mtu=1600f=9900000/100000, ns_per_byte=80808/1000ptime=2000000000/1000, cptime=0/1000, offtime=0/1000New cls: id=9, bw=80 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1600, offtime=0, parent=86846b2c, borrow=86846b2c pri=6, maxidle=31, minidle=-258, maxq=48, clsfg=20[qm_cbq_reset_dstcp_ctrl] dstcp_ctrl_fg=0x1, dstcp_pkt_delay=13 ms, dstcp_max_burst=6056 bytesCLOCKHZ=1000gConfig.Interface[0].IP_Addr = 127.0.0.1gConfig.Interface[0].Subnet_Mask = 255.255.255.255gConfig.Interface[0].Description = LOCAL_LOOPBACKgConfig.Interface[0].Framing =***** [iput_IpLinkUp] ifno=0, link_type:12Interface 0 ip = 127.0.0.1gConfig.Interface[1].IP_Addr = 192.168.1.1gConfig.Interface[1].Subnet_Mask = 255.255.255.0gConfig.Interface[1].Description = LAN1gConfig.Interface[1].Framing =gConfig.Interface[1].VLAN_Idx = 0ifp->ipaddr = C0A80101ifp->netmask = FFFFFF00gConfig.Vlan_Ports[gConfig.Interface[1].VLAN_Idx].VNet = 1gConfig.Vlan_Ports[gConfig.Interface[1].VLAN_Idx].IGMP_Querier_Enable = 0[IfInit] ifno=1, gConfig.Interface[1].vlan_tagged=0, line 693br_register_static_mcast_mac: Add static entry 01:00:5E: to VLAN 0 (port 1)br_register_static_mcast_mac: Add static entry 01:00:5E: to VLAN 0 (port 2)br_register_static_mcast_mac: Add static entry 01:00:5E: to VLAN 0 (port 1)br_register_static_mcast_mac: Add static entry 01:00:5E: to VLAN 0 (port 2)br_register_static_mcast_mac: Add static entry 01:00:5E: to VLAN 0 (port 1)br_register_static_mcast_mac: Add static entry 01:00:5E: to VLAN 0 (port 2)br_register_static_mcast_mac: Add static entry 01:00:5E: to VLAN 0 (port 1)br_register_static_mcast_mac: Add static entry 01:00:5E: to VLAN 0 (port 2)[mac_0_init] ifno=1, vlan=0, vid=1, port_mask=0x1d, mac_0_initialized=0[KERN_INFO]IFX PMU driver, version 1.0.5, (c)2009 Infineon Technologies AGifx_dma_init_module :ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 5 regid 0 regbit 5ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module DMA has been activated 1 times before[map_dma_chan 1618]: dma_chan[0] request_irq 64IrqConnect : IRQ = 64, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[1] request_irq 65IrqConnect : IRQ = 65, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[2] request_irq 66IrqConnect : IRQ = 66, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[3] request_irq 67IrqConnect : IRQ = 67, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[4] request_irq 68IrqConnect : IRQ = 68, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[5] request_irq 69IrqConnect : IRQ = 69, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[6] request_irq 70IrqConnect : IRQ = 70, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[7] request_irq 71IrqConnect : IRQ = 71, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[8] request_irq 72IrqConnect : IRQ = 72, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[9] request_irq 73IrqConnect : IRQ = 73, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[10] request_irq 74IrqConnect : IRQ = 74, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[11] request_irq 75IrqConnect : IRQ = 75, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[12] request_irq 89IrqConnect : IRQ = 89, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[13] request_irq 90IrqConnect : IRQ = 90, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[14] request_irq 91IrqConnect : IRQ = 91, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[15] request_irq 92IrqConnect : IRQ = 92, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[16] request_irq 93IrqConnect : IRQ = 93, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[17] request_irq 62IrqConnect : IRQ = 62, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[18] request_irq 80IrqConnect : IRQ = 80, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[19] request_irq 85IrqConnect : IRQ = 85, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[20] request_irq 128IrqConnect : IRQ = 128, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[21] request_irq 129IrqConnect : IRQ = 129, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[22] request_irq 130IrqConnect : IRQ = 130, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[23] request_irq 131IrqConnect : IRQ = 131, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[24] request_irq 132IrqConnect : IRQ = 132, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[25] request_irq 133IrqConnect : IRQ = 133, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[26] request_irq 134IrqConnect : IRQ = 134, Handler = 0x80355340[map_dma_chan 1618]: dma_chan[27] request_irq 135IrqConnect : IRQ = 135, Handler = 0x80355340ifx_dma_init_module : g_desc_list 81105dc0[KERN_INFO]IFX DMA driver, version ifxmips_dma_core.c:v1.0.4,(c)2009 Infineon Technologies AG[KERN_INFO]Infineon Technologies RCU driver version 1.1.2vr9_config_mdio_gpio !!![vr9_config_mdio_gpio] *IFX_GPIO_P2_ALTSEL0=0xc00, IFX_GPIO_P2_ALTSEL1=0x0, *IFX_GPIO_P2_DIR=0x8c01, *IFX_GPIO_P2_OD=0x8c01IFX SWITCH API, Version 1.1.6.7IFX_ETHSW_Open() !!![KERN_INFO]SWAPI: Registered character device [switch_api] with major no [81]ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 29 regid 0 regbit 29ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PPE-TOP has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 23 regid 0 regbit 23ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PPE-DPLUSM has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 24 regid 0 regbit 24ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PPE-DPLUSS has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 28 regid 0 regbit 28ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module SWITCH has been activated 1 times beforeSwitch API: PCE MicroCode loaded !!IFX_ETHSW_IOCTL_WrapperInit() !!!chip_id 101c0083 chip_id 1c0Switch Auto Polling value = 0[KERN_ERR ] GPHY FW load for A1x !!vr9_gphy_gpio_init : Config GPIO3 clock !!!IF_CLK = 10e00008BSP_GPIO_P0_ALTSEL0 00002000 BSP_GPIO_P0_ALTSEL1 00000080 0000e404 0000e404BSP_GPIO_P1_ALTSEL0 00008580 BSP_GPIO_P1_ALTSEL1 00000000 0000b1b8 0000b1b8BSP_GPIO_P2_ALTSEL0 00000c00 BSP_GPIO_P2_ALTSEL1 00000000 00008c01 00008c01BSP_GPHY0_Cfg 1fe70000 BSP_GPHY1_Cfg 1fe70000ifx_pmu_set: PMU_PWDCR0 = 0xc615929f module 28 regid 0 regbit 28ifx_pmu_set: Module SWITCH has been activated 2 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8615929f module 30 regid 0 regbit 30ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module GPHY has been activated 1 times beforeSwitch Auto Polling value = 0vr9_gphy_reset() !!!GPHY FIRMWARE LOAD SUCCESSFULLY AT ADDR : 750000, gphy_fw_dma=0x8074d688[set_external_gphy_mdio_auto_polling] External GPHY Port 0, firmware version: 8200[gphy_patch] External External Port 0, GPHY firmware version: 8200[gphy_patch] External Chip v1.3[KERN_INFO] IFX GPHY driver FE Mode, version ifxmips_vr9_gphy: V0.9 - Firmware: 109[amazon_s_eth_init] Loading A5 (MII0/1 + ATM) driver ......[amazon_s_eth_init] gPPE_Start_Module=0x1, gPPE_HAL_Start_Module=0x0ifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 9 regid 0 regbit 9ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module DSL-DFE has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 13 regid 0 regbit 13ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module AHBS has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 19 regid 0 regbit 19ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PPE-SSL01 has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 21 regid 0 regbit 21ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PPE-TC has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 22 regid 0 regbit 22ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PPE-EMA has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 23 regid 0 regbit 23ifx_pmu_set: Module PPE-DPLUSM has been activated 2 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 24 regid 0 regbit 24ifx_pmu_set: Module PPE-DPLUSS has been activated 2 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 28 regid 0 regbit 28ifx_pmu_set: Module SWITCH has been activated 3 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8615909f module 29 regid 0 regbit 29ifx_pmu_set: Module PPE-TOP has been activated 2 times beforeifx_pmu_set: PMU_PWDCR0 = 0x8611909f module 18 regid 0 regbit 18ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PPE-QSB has been activated 1 times before[a5 alloc_dma] pre_alloc_desc_total_num=704, line 6150[turn_on_dma_rx] a5, line 4542[turn_on_dma_rx] a5, line 4542IrqConnect : IRQ = 87, Handler = 0x8037DCF8IrqConnect : IRQ = 88, Handler = 0x8037DE00Succeeded!PPE datapath driver info: Version ID: 64.3.7.1.0.1.4 Family : VR9 DR Type : Normal Data Path | Indirect-Fast Path Interface : MII0 | MII1 | ATM Mode : Routing Release : 0.1.4PPE firmware info: Version ID: 7.2.4.6.1.17 Family : VR9 FW Type : Acceleration Interface : MII0/1 + ATM Mode : Bridging + IPv4 Routing Release : 1.17[switch_utility] cmd=Enable[switch_utility] switch_utility, Enable,[switch_utility] cmd=CfgSet 3 1 1542 0 00:00:00:00:00:00[switch_utility] switch_utility, CfgSet, 3, 1, 1542, 0, 00:00:00:00:00:00,[switch_utility] cmd=RegisterSet 0x453 0x0[switch_utility] switch_utility, RegisterSet, 0x453, 0x0,[switch_utility] cmd=RegisterSet 0x454 0x07f[switch_utility] switch_utility, RegisterSet, 0x454, 0x07f,[switch_utility] cmd=RegisterSet 0x455 0x07f[switch_utility] switch_utility, RegisterSet, 0x455, 0x07f,[switch_utility] cmd=RegisterSet 0xc4B 0x3F[switch_utility] switch_utility, RegisterSet, 0xc4B, 0x3F,[switch_utility] cmd=RegisterSet 0xc4C 0x105[switch_utility] switch_utility, RegisterSet, 0xc4C, 0x105,[switch_utility] cmd=RegisterSet 0xc55 0x1800[switch_utility] switch_utility, RegisterSet, 0xc55, 0x1800,[switch_utility] cmd=RegisterSet 0xc54 0x1801[switch_utility] switch_utility, RegisterSet, 0xc54, 0x1801,[switch_utility] cmd=RegisterSet 0xc53 0x1811[switch_utility] switch_utility, RegisterSet, 0xc53, 0x1811,[switch_utility] cmd=RegisterSet 0xC52 0x1812[switch_utility] switch_utility, RegisterSet, 0xC52, 0x1812,[switch_utility] cmd=RegisterSet 0xc51 0x1813[switch_utility] switch_utility, RegisterSet, 0xc51, 0x1813,[switch_utility] cmd=RegisterSet 0xC50 0x1814[switch_utility] switch_utility, RegisterSet, 0xC50, 0x1814,[switch_utility] cmd=RegisterSet 0x903 0x180[switch_utility] switch_utility, RegisterSet, 0x903, 0x180,[switch_utility] cmd=RegisterSet 0x90F 0x180[switch_utility] switch_utility, RegisterSet, 0x90F, 0x180,[switch_utility] cmd=RegisterSet 0x93F 0x180[switch_utility] switch_utility, RegisterSet, 0x93F, 0x180,[switch_utility] cmd=RegisterSet 0x91B 0x180[switch_utility] switch_utility, RegisterSet, 0x91B, 0x180,[switch_utility] cmd=RegisterSet 0x933 0x180[switch_utility] switch_utility, RegisterSet, 0x933, 0x180,[switch_utility] cmd=RegisterSet 0x927 0x180[switch_utility] switch_utility, RegisterSet, 0x927, 0x180,[switch_utility] cmd=RegisterSet 0x94B 0x180[switch_utility] switch_utility, RegisterSet, 0x94B, 0x180,[switch_utility] cmd=PortLinkCfgSet 0 0 0 0 1000 0 0 3 0 0[switch_utility] switch_utility, PortLinkCfgSet, 0, 0, 0, 0, 1000, 0, 0, 3, 0, 0,[switch_utility] cmd=PortLinkCfgSet 1 0 0 0 1000 0 0 3 0 0[switch_utility] switch_utility, PortLinkCfgSet, 1, 0, 0, 0, 1000, 0, 0, 3, 0, 0,[switch_utility] cmd=PortLinkCfgSet 5 0 0 0 100 0 0 0 1 0[switch_utility] switch_utility, PortLinkCfgSet, 5, 0, 0, 0, 100, 0, 0, 0, 1, 0,[switch_utility] cmd=PortLinkCfgSet 2 0 0 0 100 0 0 0 1 0[switch_utility] switch_utility, PortLinkCfgSet, 2, 0, 0, 0, 100, 0, 0, 0, 1, 0,[switch_utility] cmd=PortLinkCfgSet 3 0 0 0 100 0 0 0 1 0[switch_utility] switch_utility, PortLinkCfgSet, 3, 0, 0, 0, 100, 0, 0, 0, 1, 0,[switch_utility] cmd=PortLinkCfgSet 4 0 0 0 100 0 0 0 1 0[switch_utility] switch_utility, PortLinkCfgSet, 4, 0, 0, 0, 100, 0, 0, 0, 1, 0,[switch_utility] cmd=RegisterSet 0xc77 0xc001[switch_utility] switch_utility, RegisterSet, 0xc77, 0xc001,[switch_utility] cmd=RegisterSet 0xc79 0xc001[switch_utility] switch_utility, RegisterSet, 0xc79, 0xc001,[switch_utility] cmd=RegisterSet 0xc81 0xc001[switch_utility] switch_utility, RegisterSet, 0xc81, 0xc001,[switch_utility] cmd=RegisterSet 0x4A 0x11C[switch_utility] switch_utility, RegisterSet, 0x4A, 0x11C,[switch_enable_igmp_snooping] gSetting.IGMP_Snooping=1[switch_utility] cmd=MulticastRouterPortAdd 6[switch_utility] switch_utility, MulticastRouterPortAdd, 6,[switch_utility] cmd=MulticastSnoopCfgSet 2 1 0 3 6 1 3 100 2 1 1[switch_utility] switch_utility, MulticastSnoopCfgSet, 2, 1, 0, 3, 6, 1, 3, 100, 2, 1, 1,[switch_utility] cmd=MulticastTableEntryAdd 4 0 224.0.0.1 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 4, 0, 224.0.0.1, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 5 0 224.0.0.1 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 5, 0, 224.0.0.1, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 2 0 224.0.0.1 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 2, 0, 224.0.0.1, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 3 0 224.0.0.1 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 3, 0, 224.0.0.1, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 0 0 224.0.0.1 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 0, 0, 224.0.0.1, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 6 0 224.0.0.1 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 6, 0, 224.0.0.1, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 4 0 224.0.0.2 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 4, 0, 224.0.0.2, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 5 0 224.0.0.2 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 5, 0, 224.0.0.2, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 2 0 224.0.0.2 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 2, 0, 224.0.0.2, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 3 0 224.0.0.2 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 3, 0, 224.0.0.2, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 0 0 224.0.0.2 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 0, 0, 224.0.0.2, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 6 0 224.0.0.2 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 6, 0, 224.0.0.2, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 4 0 224.0.0.22 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 4, 0, 224.0.0.22, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 5 0 224.0.0.22 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 5, 0, 224.0.0.22, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 2 0 224.0.0.22 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 2, 0, 224.0.0.22, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 3 0 224.0.0.22 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 3, 0, 224.0.0.22, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 0 0 224.0.0.22 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 0, 0, 224.0.0.22, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 6 0 224.0.0.22 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 6, 0, 224.0.0.22, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 4 0 239.255.255.250 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 4, 0, 239.255.255.250, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 5 0 239.255.255.250 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 5, 0, 239.255.255.250, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 2 0 239.255.255.250 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 2, 0, 239.255.255.250, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 3 0 239.255.255.250 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 3, 0, 239.255.255.250, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 0 0 239.255.255.250 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 0, 0, 239.255.255.250, 0.0.0.0, 2,[switch_utility] cmd=MulticastTableEntryAdd 6 0 239.255.255.250 0.0.0.0 2[switch_utility] switch_utility, MulticastTableEntryAdd, 6, 0, 239.255.255.250, 0.0.0.0, 2,[switch_utility] cmd=PCE_RuleDelete 50[switch_utility] switch_utility, PCE_RuleDelete, 50,[switch_utility] cmd=PCE_RuleDelete 51[switch_utility] switch_utility, PCE_RuleDelete, 51,[switch_utility] cmd=PCE_RuleDelete 52[switch_utility] switch_utility, PCE_RuleDelete, 52,[switch_utility] cmd=PCE_RuleDelete 53[switch_utility] switch_utility, PCE_RuleDelete, 53,[switch_utility] cmd=PCE_RuleDelete 54[switch_utility] switch_utility, PCE_RuleDelete, 54,[switch_utility] cmd=PCE_RuleDelete 55[switch_utility] switch_utility, PCE_RuleDelete, 55,[switch_utility] cmd=PCE_RuleWrite 9 1 1 6 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0 0 00:00:00:00:00:00 0 0 0 0 0 0 0 0 0 0 0.0.0.0 0 0 0.0.0.0 0 1 2048 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0[switch_utility] switch_utility, PCE_RuleWrite, 9, 1, 1, 6, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0, 0, 00:00:00:00:00:00, 0 , 0, 0, 0, 0, 0, 0, 0, 0, 0, 0.0.0.0, 0, 0, 0.0.0.0, 0, 1, 2048, 0, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0 , 0, 0, 0, 0, 0, 0, 0,[switch_utility] cmd=PCE_RuleWrite 10 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 4608 1 3 0 0 0 0 0 00 0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0[switch_utility] switch_utility, PCE_RuleWrite, 10, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1, 4608, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 4, 64, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,[switch_utility] cmd=PCE_RuleWrite 11 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 4864 1 3 0 0 0 0 0 00 0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0[switch_utility] switch_utility, PCE_RuleWrite, 11, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1, 4864, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 4, 64, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,[switch_utility] cmd=PCE_RuleWrite 12 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 5632 1 3 0 0 0 0 0 00 0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0[switch_utility] switch_utility, PCE_RuleWrite, 12, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1, 5632, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 4, 64, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,[switch_utility] cmd=PCE_RuleWrite 13 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 5888 1 3 0 0 0 0 0 00 0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0[switch_utility] switch_utility, PCE_RuleWrite, 13, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1, 5888, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 4, 64, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,[switch_utility] cmd=PCE_RuleWrite 14 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 8704 1 3 0 0 0 0 0 00 0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0[switch_utility] switch_utility, PCE_RuleWrite, 14, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1, 8704, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 4, 64, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,[switch_utility] cmd=PCE_RuleWrite 15 1 0 0 0 0 0 0 0 0 0 0 00:00:00:00:00:00 0x0 0 00:00:00:00:00:00 0x0 1 4352 1 3 0 0 0 0 0 00 0.000.000.000 0x0 0 000.000.000.000 0x0 1 2048 0x0 1 2 0x0 0 0 0 0 1 1 0 0 0 0 0 0 4 64 0 0 0 0 0 0 0 0 0 0 0[switch_utility] switch_utility, PCE_RuleWrite, 15, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 00:00:00:00:00:00, 0x0, 0, 00:00:00:00:00:00 , 0x0, 1, 4352, 1, 3, 0, 0, 0, 0, 0, 000.000.000.000, 0x0, 0, 000.000.000.000, 0x0, 1, 2048, 0x0, 1, 2, 0x0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 4, 64, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,[mac_0_init] VLAN port: 0x001d, ifCount=1[mac_0_init] ------->add port 4 to vlan 1[mac_0_init] ------->add port 2 to vlan 1[mac_0_init] ------->add port 3 to vlan 1[mac_0_init] ------->add port 0 to vlan 1[config_SW_VLAN] bTaggedIngress=0, bTaggedEgress=0[switch_utility] cmd=VLAN_IdCreate 50 1[switch_utility] switch_utility, VLAN_IdCreate, 50, 1,[switch_utility] cmd=VLAN_PortCfgSet 6 50 0 0 3 0 0[switch_utility] switch_utility, VLAN_PortCfgSet, 6, 50, 0, 0, 3, 0, 0,[switch_utility] cmd=VLAN_IdCreate 1 1[switch_utility] switch_utility, VLAN_IdCreate, 1, 1,[switch_utility] cmd=VLAN_PortCfgSet 0 1 0 0 3 0 0[switch_utility] switch_utility, VLAN_PortCfgSet, 0, 1, 0, 0, 3, 0, 0,[switch_utility] cmd=VLAN_PortCfgSet 2 1 0 0 3 0 0[switch_utility] switch_utility, VLAN_PortCfgSet, 2, 1, 0, 0, 3, 0, 0,[switch_utility] cmd=VLAN_PortCfgSet 3 1 0 0 3 0 0[switch_utility] switch_utility, VLAN_PortCfgSet, 3, 1, 0, 0, 3, 0, 0,[switch_utility] cmd=VLAN_PortCfgSet 4 1 0 0 3 0 0[switch_utility] switch_utility, VLAN_PortCfgSet, 4, 1, 0, 0, 3, 0, 0,[switch_utility] cmd=VLAN_PortMemberAdd 1 0 0[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 0, 0,[switch_utility] cmd=VLAN_PortMemberAdd 1 2 0[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 2, 0,[switch_utility] cmd=VLAN_PortMemberAdd 1 3 0[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 3, 0,[switch_utility] cmd=VLAN_PortMemberAdd 1 4 0[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 4, 0,[switch_utility] cmd=VLAN_PortMemberAdd 1 6 1[switch_utility] switch_utility, VLAN_PortMemberAdd, 1, 6, 1,mac_0_init: interface 1 registered to VLAN 1, port_mask=1dMAC Address(ifno 1): 1c:c6:3c:***** [iput_IpLinkUp] ifno=1, link_type:12br_MacAddress=1C-C6-3C-67-A3-7FInterface 1 ip = 192.168.1.1gConfig.Interface[2].IP_Addr = 0.0.0.0gConfig.Interface[2].Subnet_Mask = 0.0.0.0gConfig.Interface[2].Description = WLANgConfig.Interface[2].Framing =gConfig.Interface[2].VLAN_Idx = 0ifp->ipaddr = C0A80101ifp->netmask = FFFFFF00gConfig.Vlan_Ports[gConfig.Interface[2].VLAN_Idx].VNet = 1gConfig.Vlan_Ports[gConfig.Interface[2].VLAN_Idx].IGMP_Querier_Enable = 0[IfInit] ifno=2, gConfig.Interface[2].vlan_tagged=0, line 693hwlan_init(85): [HWLAN] ifno=2 irno=7 port=0x00000000[hwlan_init] if_table[2]::1c-c6-3c-***** [iput_IpLinkUp] ifno=2, link_type:12Interface 2 ip = 192.168.1.1gConfig.Interface[3].IP_Addr = 0.0.0.0gConfig.Interface[3].Subnet_Mask = 0.0.0.0gConfig.Interface[3].Description = ATM1gConfig.Interface[3].Framing = AAL5[IfInit] ifno=3, gConfig.Interface[3].vlan_tagged=0, line 693[sar_0_init] ifno=3, T_WAN_INT=3, sar_init=0, g_atm_priv_data.max_connections=15ATM_UBR[ppe_open] g_atm_priv_data.connection_table=0[turn_on_dma_rx] a5, line 4542[ppe_open] (8.32): conn = 0, f_enable_irq=1[sar_0_init] index=0, ifno=3, f_llc=1[mpoa_setup] mpoa_type=0, f_llc=1[sar_0_init] Init SAR ifno:3 g_atm_vcc[0] CONN:0 VPI/VCI:8/32 PORT:0[sar_0_init] sar ifno: 3, flag: 0x00000200, up, sar_init=0MAC Address: 1c:c6:3c:67:a3:7e[switch_utility] cmd=VLAN_IdCreate 2 2[switch_utility] switch_utility, VLAN_IdCreate, 2, 2,[switch_utility] cmd=VLAN_IdCreate 20 2[switch_utility] switch_utility, VLAN_IdCreate, 20, 2,[switch_utility] cmd=VLAN_PortCfgSet 11 2 0 0 3 0 1[switch_utility] switch_utility, VLAN_PortCfgSet, 11, 2, 0, 0, 3, 0, 1,[switch_utility] cmd=VLAN_PortCfgSet 10 20 0 0 3 0 1[switch_utility] switch_utility, VLAN_PortCfgSet, 10, 20, 0, 0, 3, 0, 1,[switch_utility] cmd=VLAN_PortMemberAdd 2 11 0[switch_utility] switch_utility, VLAN_PortMemberAdd, 2, 11, 0,[switch_utility] cmd=VLAN_PortMemberAdd 20 10 0[switch_utility] switch_utility, VLAN_PortMemberAdd, 20, 10, 0,[switch_utility] cmd=VLAN_PortMemberAdd 20 6 1[switch_utility] switch_utility, VLAN_PortMemberAdd, 20, 6, 1,[switch_utility] cmd=VLAN_PortMemberAdd 2 6 1[switch_utility] switch_utility, VLAN_PortMemberAdd, 2, 6, 1,[switch_utility] cmd=VLAN_PortMemberAdd 50 10 0[switch_utility] switch_utility, VLAN_PortMemberAdd, 50, 10, 0,[switch_utility] cmd=MAC_TableEntryAdd 2 6 0 1 00:00:00:00:00:00[switch_utility] switch_utility, MAC_TableEntryAdd, 2, 6, 0, 1, 00:00:00:00:00:00,Interface 3 ip = 0.0.0.0gConfig.Interface[4].IP_Addr = 0.0.0.0gConfig.Interface[4].Subnet_Mask = 0.0.0.0gConfig.Interface[4].Description = ATM2gConfig.Interface[4].Framing = AAL5gConfig.Interface[4].VLAN_Idx = 1ifp->ipaddr = C0A80201ifp->netmask = FFFFFF00gConfig.Vlan_Ports[gConfig.Interface[4].VLAN_Idx].VNet = 0gConfig.Vlan_Ports[gConfig.Interface[4].VLAN_Idx].IGMP_Querier_Enable = 0[IfInit] ifno=4, gConfig.Interface[4].vlan_tagged=0, line 693[sar_0_init] ifno=4, T_WAN_INT=3, sar_init=1, g_atm_priv_data.max_connections=15ATM_VBR_NRT[ppe_open] g_atm_priv_data.connection_table=1[ppe_open] (8.38): conn = 1, f_enable_irq=0[sar_0_init] index=1, ifno=4, f_llc=1[mpoa_setup] mpoa_type=0, f_llc=1[sar_0_init] Init SAR ifno:4 g_atm_vcc[1] CONN:1 VPI/VCI:8/38 PORT:0[sar_0_init] sar ifno: 4, flag: 0x00000220, up, sar_init=1MAC Address: 1c:c6:3c:[sar_0_ioctl] ifno 4 up/down 0 ->br_MacAddress=1C-C6-3C-Interface 4 ip = 192.168.2.1[sar_0_ioctl] ifno 4 up/down 0 ->gConfig.Interface[20].IP_Addr = 192.168.1.1gConfig.Interface[20].Subnet_Mask = 255.255.255.0gConfig.Interface[20].Description = LAN2gConfig.Interface[20].Framing =gConfig.Interface[20].VLAN_Idx = 1ifp->ipaddr = C0A80201ifp->netmask = FFFFFF00gConfig.Vlan_Ports[gConfig.Interface[20].VLAN_Idx].VNet = 0gConfig.Vlan_Ports[gConfig.Interface[20].VLAN_Idx].IGMP_Querier_Enable = 0[IfInit] ifno=20, gConfig.Interface[20].vlan_tagged=0, line 693[mac_0_init] ifno=20, vlan=1, vid=3, port_mask=0x2, mac_0_initialized=1[mac_0_init] VLAN port: 0x0002, ifCount=2[mac_0_init] ------->add port 5 to vlan 3[config_SW_VLAN] bTaggedIngress=0, bTaggedEgress=0[switch_utility] cmd=VLAN_IdCreate 3 3[switch_utility] switch_utility, VLAN_IdCreate, 3, 3,[switch_utility] cmd=VLAN_PortCfgSet 5 3 0 0 3 0 0[switch_utility] switch_utility, VLAN_PortCfgSet, 5, 3, 0, 0, 3, 0, 0,[switch_utility] cmd=VLAN_PortMemberAdd 3 5 0[switch_utility] switch_utility, VLAN_PortMemberAdd, 3, 5, 0,[switch_utility] cmd=VLAN_PortMemberAdd 3 6 1[switch_utility] switch_utility, VLAN_PortMemberAdd, 3, 6, 1,mac_0_init: interface 20 registered to VLAN 3, port_mask=2MAC Address(ifno 20): 1c:c6:3c:67:a3:7f***** [iput_IpLinkUp] ifno=20, link_type:12Interface 20 ip = 192.168.2.1gConfig.Interface[27].IP_Addr = 0.0.0.0gConfig.Interface[27].Subnet_Mask = 0.0.0.0gConfig.Interface[27].Description = COM1gConfig.Interface[27].Framing =pppInit> set (PPPShutdownRequest[ifno] = 0)>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if_umts_init 27 <<<<<<<<<if_umts_init() WAN interface 27, UMTS-COM1: baudrate=115200if_umts_init() MAC:1C:C6:3C:67:A3:7FRUNTASK id=2 umtsEventHandleTsk...RUNTASK id=3 umtsEventExeHandleTsk...umtsReceQueueInit() Host controller disable, bypass queue init...RUNTASK id=4 umtsReceQueueTsk...RUNTASK id=5 umtsReceTsk...RUNTASK id=6 umtsWritTsk...Interface 27 ip = 0.0.0.0ruleCheck()> Group: 0, Error: Useless rule index will be truncated, from idx:2ruleCheck()> Group: 1, Error: Useless rule index will be truncated, from idx:22ruleCheck()> Group: 2, Error: Useless rule index will be truncated, from idx:0CBAC rule format check succeed !!reqCBACBuf()> init match pool, Have: 1000Memory Address: 0xffffffff867e6184 ~ 0xffffffff867ecf00reqCBACBuf()> init timeGap pool, Have: 10000Memory Address: 0xffffffff867ecf00 ~ 0xffffffff8681dc54reqCBACBuf()> init sameHost pool, Have: 2000Memory Address: 0xffffffff8681dc54 ~ 0xffffffff8682d674CBAC rule pool initialized !![init_if] local_if_mask=0x7f80007[init_if] local_wiredif_mask=0x780002[init_if] local_wirelessif_mask=0x7800004[init_if] localorVPN_if_mask=0x7f80007Init NAT data structureRUNTASK id=7 if_task if0...RUNTASK id=8 if_task if1...RUNTASK id=9 if_task if2...RUNTASK id=10 if_task if3...RUNTASK id=11 if_task if4...RUNTASK id=12 if_task if20...RUNTASK id=13 if_task if27...RUNTASK id=14 timer_task...RUNTASK id=15 conn_mgr...RUNTASK id=16 main_8021x...Build Day = Mar 9 2012RUNTASK id=17 saveRandomSeedTask...[VFS_init] Start...[VFS_init] vfsState:1vfs_codepage_init() TimeZone:25, vfs_cp_idx:25, vfs_cp_ID:1fat_codePageInit() TimeZone:25, codePage:Unknown, cPID:1, cpSize:256, toUpSize:0ntfs_codepage timezone:25, lan= 0ntfs_codePageInit() TimeZone:25, codePage:1==[vfs_register_filesystem]============================list size:1, Method:0x807fc15c 1) Type:0xfc, Name:BRN-VFS=================================================================[VFS_init] VFS ROOT FS init OK==[vfs_register_filesystem]============================list size:7, Method:0x807fc35c 1) Type:0x01, Name:FAT12 2) Type:0x04, Name:FAT16 3) Type:0x06, Name:FAT16 4) Type:0x0b, Name:FAT32 5) Type:0x0c, Name:FAT32 6) Type:0x0e, Name:FAT16 7) Type:0x81, Name:Minix=================================================================[VFS_init] FAT init OK==[vfs_register_filesystem]============================list size:1, Method:0x807fcf64 1) Type:0x07, Name:NTFS/HPFS=================================================================[VFS_init] NTFS init OK[VFS_init]-[vfs_mount_root] Start...[VFS_init]-[vfs_mount_root] Init <root> OK...[VFS_init]-[vfs_mount_root] Init <dev> OK...[VFS_init]-[vfs_mount_root] Init <mnt> OK...[0-START]========================================= Node 000-[\], DIR, MountFlag:0x00[0-END]=========================================== [1-START]========================================= Node 001-[dev], DIR, MountFlag:0x00 [1-END]=========================================== [1-START]========================================= Node 002-[mnt], DIR, MountFlag:0x00 [1-END]===========================================dump_inode() freeCnt:77, usedCnt:3RUNTASK id=18 fileChange_eventTsk()...[USB-INIT] main() ====== call UsbSysInit() ...[USB] UsbSPoolArray: 86522CD4H ~ 8667BAD3, UsbSPool:86522CE0[USB] UsbMPoolArray: 85DC2D88H ~ 86522887, UsbMPool:85DC2DA0[USB] UsbLPoolArray: 86682104H ~ 866DF923, UsbLPool:86682120[USB] Small Un-Cached Memory(8025): 86522CE0 ~ 8667BA0F[USB] Medium Un-Cached Memory(470): 85DC2DA0 ~ 8651E85F[USB] Large Un-Cached Memory(21): 86682120 ~ 866DB51FsetUsbPciInfo() cpu_to_usb_addr_shift[5]:0x00000000, usb_to_cpu_addr_shift[5]:0x00000000usb_pci_probe() Found Synopsis OTG-1, baseAddr:0xbe101000, IRQ:54setUsbPciInfo() cpu_to_usb_addr_shift[6]:0x00000000, usb_to_cpu_addr_shift[6]:0x00000000usb_pci_probe() Found Synopsis OTG-2, baseAddr:0xbe106000, IRQ:83usb_hcd_init() probe PCI function:2 !!otg_host_power_set() USB Host0 Power OFFusb_host_power_set() isOn:1usb_host_power_set() Previous power off:0, current time:0usb_host_power_set(1) min time delay:6000, current delay:0usb_host_power_set() Need delay:6500 **********0usb_host_power_set(2) min time delay:6000, current delay:0dwc_otg_vbus_on(NULL) Enable USB power!!otg_host_power_set() USB Host1 Power OFFusb_host_power_set() isOn:1usb_hcd_init() func(0):0usb_hcd_init() func(1):0usb_hcd_init() func(2):0usb_hcd_init() func(3):0usb_hcd_init() func(4):0usb_hcd_init() func(5):1localhc_init() install otg driver(host_drv = 0x809201F8, otg_driver=0x809201F8).usb_hcd_init() func(6):1localhc_init() install otg driver(host_drv = 0x809201F8, otg_driver=0x809201F8).usb_hcd_init(): succ.[USB-INIT] main() ====== after call UsbSysInit()InitCommSys: RESOURCE_BASE = 141, NUMRES = 640InitCommSys: EVENT_BASE = 339, NUMEVT = 818InitCommSys: MAILBOX_BASE = 6, NUMMBX = 64RUNTASK id=20 period_task...[Dhcpd_Start]RUNTASK id=21 dhcp_daemon...RUNTASK id=22 dhcp_clt... on interface 3main()> usb:1, ftp:0Primary image: 0, flash area 1found signature: 78h 56h 34h 12hulImgLens=2228032, LENGTH[1]-12=6291444, type:0length checking OK[0]2 find End at 0xFFFFFFFFB149FC00 len=2228032, type=0found signature: 78h 56h 34h 12hulImgLens=1384128, LENGTH[1]-12=6291444, type:10length checking OK[1]2 find End at 0xFFFFFFFFB15F1C00 len=1384128, type=10found signature: 78h 56h 34h 12hulImgLens=243042, LENGTH[1]-12=6291444, type:11length checking OK[2]2 find End at 0xFFFFFFFFB162D400 len=243042, type=11found signature: 78h 56h 34h 12hulImgLens=238377, LENGTH[1]-12=6291444, type:12length checking OK[3]2 find End at 0xFFFFFFFFB1667800 len=238377, type=12---[ LZMA head start in 0xFFFFFFFFB1667C00 ]---found signature: 78h 56h 34h 12hulImgLens=348593, LENGTH[1]-12=6291444, type:50length checking OK[4]2 find End at 0xFFFFFFFFB16BCC00 len=348593, type=50---[ LZMA head start in 0xFFFFFFFFB16BD000 ]---found signature: 78h 56h 34h 12hulImgLens=363500, LENGTH[1]-12=6291444, type:90length checking OK[5]2 find End at 0xFFFFFFFFB1715C00 len=363500, type=90Image[1] at 0xB1280000, len=2228032, type=0Image[2] at 0xB14A0000, len=1384128, type=10Image[3] at 0xB15F2000, len=243042, type=11Image[4] at 0xB162D800, len=238377, type=12Image[5] at 0xB1667C00, len=348593, type=50Image[6] at 0xB16BD000, len=363500, type=90[get_web_address] Web-0: addr:0xb14a0000, len:1384128, type:10[get_web_address] Web-1: addr:0xb15f2000, len:243042, type:11[get_web_address] Web-2: addr:0xb162d800, len:238377, type:12getUnZipFileLength: [ZIP 3]getUnZipFileLength: [ZIP 1]Unzipping from B14A0000 to 87C77800 ... [ZIP 3] [ZIP 2] doneUncompressed size = 2655424getUnZipFileLength: [ZIP 3]getUnZipFileLength: [ZIP 1][absread] flash_init: pfs image found at ffffffffb15f2000, size is 1317384 bytesUnzipping from B15F2000 to 87B35A00 ... [ZIP 3] [ZIP 2] doneUncompressed size = 1317384RUNTASK httpd...RUNTASK id=28 SSLClient ...g_Client_Cert_Array=0x82bad3e0RUNTASK id=29 dnsproxy...startNBIOSTask()...RUNTASK id=30 nbios_main...RUNTASK id=31 padmin_task_entry...RUNTASK id=32 dhcpd_mgmt_task...runDDNS() ddns_enable:0, DDNSTaskRun:0, needReRunDDNS:1UPnP task run-up... upnpFunc:1UPNP Device initialize success! slot=33TR64 is enabledTR64 Device initialize success! slot=34update_device_OUI: OUI_str=1CC63C[0] Allocate mailbox 6[0] Allocate mailbox 7Begin search NamePath = InternetGatewayDevice.DeviceInfo.FirstUseDateBegin search NamePath = InternetGatewayDevice.DeviceInfo.Fir stUseDateFirstUseDate:2012-03-09T00:01:02UART RX InputStarting Multitask...rzMemory start: 0x82A4DBD0, end 0x82BAD3D0, size 1439744RUNTASK id=37 xdsl_mgmt_task...[0] Allocate resource 141, FreeResource = 1ifx_pmu_set: PMU_PWDCR0 = 0x8611909f module 8 regid 0 regbit 8ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module SPI has been activated 1 times before[KERN_INFO]IFX SSC driver, version 2.1.3, (c)2009 Infineon Technologies AGcall ifx_ssc_init() = 0ifx_pmu_set: PMU_PWDCR0 = 0x8611809f module 12 regid 0 regbit 12ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module GPTC has been activated 1 times before[KERN_INFO]gptu: totally 6 16-bit timers/countersIrqConnect : IRQ = 118, Handler = 0x80356F50[KERN_INFO]gptu: succeeded to request irq 118IrqConnect : IRQ = 119, Handler = 0x80356F50[KERN_INFO]gptu: succeeded to request irq 119IrqConnect : IRQ = 120, Handler = 0x80356F50[KERN_INFO]gptu: succeeded to request irq 120IrqConnect : IRQ = 121, Handler = 0x80356F50[KERN_INFO]gptu: succeeded to request irq 121IrqConnect : IRQ = 122, Handler = 0x80356F50[KERN_INFO]gptu: succeeded to request irq 122IrqConnect : IRQ = 123, Handler = 0x80356F50[KERN_INFO]gptu: succeeded to request irq 123 do_div error ???[KERN_INFO]ifx_gptu_timer_set(4, 16000), divider = 15625000request_timer(4, 0x0000010D, 15625000)[KERN_INFO]request_timer(4, 0x0000010D, 15625000)...ifx_pmu_set: PMU_PWDCR0 = 0x8611809f module 12 regid 0 regbit 12ifx_pmu_set: Module GPTC has been activated 2 times beforesuccessful!Init timer (4) - OK do_div error ???[KERN_INFO]ifx_gptu_timer_set(6, 100000), divider = 2500000request_timer(6, 0x0000010D, 2500000)[KERN_INFO]request_timer(6, 0x0000010D, 2500000)...successful!Init timer (6) - OKRUNTASK id=39 apAppInit...RUNTASK id=42 vinax_task...start http redir.RUNTASK id=43 hr_daemon...RUNTASK id=44 hr_misc_daemon...--> vinax_task() started ...<6>ADM5120 Board Driver, Version 0.0.4.1<6>(c) Copyright 2003, Infineon Technologies AGBoard_InitIrq!Board_InitIrq!--> drv_danube_rb_init() finished ...MEI CPE Driver, Version 1.0.2(c) Copyright 2009, Infineon Technologies AG### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###Using major number 0ifx_pmu_set: PMU_PWDCR0 = 0x8611809f module 9 regid 0 regbit 9ifx_pmu_set: Module DSL-DFE has been activated 2 times before--> drv_vinax_init() finished ...xSpeedtsk priority is 80--> DSL_ModuleInit() finished ...-->VINAX control device open finished ...T >> init dev: base address = 0xBE116000T >> parse: opt value = 99T >> open device: /dev/mei_cpe/0.T >> ioct(FIO_MEI_DEV_INIT): baseaddr = 0xBE116000, IRQ = 99pInitDev->meiBaseAddr=0xbe116000hwVers=0x230MEI_DRV[00]: INIT DEVICE - NO INTERUPTS --> ACTIVE POLL MODEMEI_DRV[00]: Start Driver Control Thread##### [IFXOS_ThreadInit] name <VnxCtrl>, tid 48, nStackSize=10000T >> Line = 00 Return = 0T >> MEI DBG WrOff: 0x000E2000T >> MEI DBG Dest: 0x00000002T >> Value: 0x00000001T >> open device: /dev/mei_cpe/0.T >> ioct(.., FIO_MEI_DBG_WRITE, ..): off=0x000E2000, des=2, count=1T >> DBG Dest[2] Write[0x000E2000] = 0x81D46638T >> DONE - ioct(.., FIO_MEI_DBG_WRITE, ..)T >> Line = 00 Return = 0--> drv_vinax_cfg() finished ...[DSL_CPE_ArgParse] fw1 name=Image[1] at 0xB1280000, len=2228032, type=0Image[2] at 0xB14A0000, len=1384128, type=10Image[3] at 0xB15F2000, len=243042, type=11Image[4] at 0xB162D800, len=238377, type=12Image[5] at 0xB1667C00, len=348593, type=50Image[6] at 0xB16BD000, len=363500, type=90[get_datapump_address] Datapump for Annex A0:4, B0:-1, C0:-1[get_datapump_address] Datapump for Annex A1:-1, B1:-1, C1:-1[get_datapump_address] r_img=4, t_img=6Unzip VDSL2 firmware ...Unzipping from B1667C00 to 866E3800 ... [ZIP 2] doneUncompressed size = 775540 ###ERROR: VDSL image exceed its buffer!!!DSL_CPE_Open calledDSL_DRV_Open calledDSL_DRV_HandleInit calledDSL_CPE: Device /dev/dsl_cpe_api/0 opened successfullyDSL_FIO_VERSION_INFORMATION_GET=0xc0247204 in controlDSL_FIO_INSTANCE_CONTROL_SET=0xc00c7224 in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_FIO_EVENT_STATUS_MASK_CONFIG_SET=0xc00c721d in controlDSL_CPE: Firmware WHAT String1: V_5.3.2.8.1.6DSL_CPE: Firmware AppType: 6DSL_CPE: Firmware WHAT String2: 5.4.1.A.1.1DSL_CPE: Firmware AppType: 1DSL_CPE: Firmware features (vcpe_hw.bin): 0x5ANNEX A in DSL_CPE_DeviceInitpData->data.pFirmware=0x866e3800pData->data.nFirmwareSize=0xbd574DSL_DRV_FwDownload calledpCurr->eventWaitQueue=47DSL_FW_REQUEST_ADSL in DSL_DRV_DEV_FwDownloadhwVers=0x230ifno2dot1x_if[2]=0ifno2dot1x_if[23]=81dot1x_wireless_if_mask=0x800004fwrite_specialConfigPara() Save random seed:6793020dns_table[0] name = "Livebox";dns_table[0] ip = "192.168.1.1";dns_table[0] fixed=1, ttl=3600000;init psock cnt=1ProDAAInitialize: SPI INIT first now ProSlicID -2103127660 ProSlicCS 1Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH[50] Allocate mailbox 8TAPI_init_task_queue: enter loop..8hwVers=0x230MEI_InternalFirmwareDownload calledDSL_CPE: User Thread Startup <evnthnd>, TID 49 (PID 49) - ENTERevtWaitQue=47RUNTASK id=17 Metalink_NetTask ...[40] Allocate mailbox 9[40] Allocate mailbox 10[40] Allocate mailbox 11[40] Allocate mailbox 12[40] Allocate mailbox 13[40] Allocate mailbox 14[40] Allocate mailbox 15[40] Allocate mailbox 16[40] Allocate mailbox 17[40] Allocate mailbox 18[40] Allocate mailbox 19[40] Allocate mailbox 20[40] Allocate mailbox 21[40] Allocate mailbox 22[40] Allocate mailbox 23[40] Allocate mailbox 24[40] Allocate resource 142, FreeResource = 2ifx_tapi_KPI_IngressThread() check: [TAPIkpi_in],803FBD08,pid=0, 51##### [IFXOS_ThreadInit] name <TAPIkpi_in>, tid 51, nStackSize=8000[40] Allocate resource 143, FreeResource = 3Lantiq MIPS34KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbHrequest_timer(2, 0x000001AE, 1)[KERN_INFO]request_timer(2, 0x000001AE, 1)...successful!ifx_mps_init_gpt() - calibration done, waited 626 loops!ifx_mps_init_structures request_irq 1 146IrqConnect : IRQ = 146, Handler = 0x8041E450ifx_mps_init_structures request_irq 2 147IrqConnect : IRQ = 147, Handler = 0x8041E58Cifx_mps_init_structures request_irq 3 0 142IrqConnect : IRQ = 142, Handler = 0x8041E634ifx_mps_init_structures request_irq 3 1 143IrqConnect : IRQ = 143, Handler = 0x8041E634ifx_mps_init_structures request_irq 3 2 144IrqConnect : IRQ = 144, Handler = 0x8041E634ifx_mps_init_structures request_irq 3 3 145IrqConnect : IRQ = 145, Handler = 0x8041E634>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 1ifx_tapi_DeviceCreate: ndev = 0, TapiDev 82A42240[40] Allocate resource 144, FreeResource = 4ifx_tapi_ChannelPrepare: nChannel 0>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 2ifx_tapi_ChannelPrepare: nChannel 1>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 3ifx_tapi_ChannelPrepare: nChannel 2>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 4ifx_tapi_ChannelPrepare: nChannel 3>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 5ifx_tapi_ChannelPrepare: nChannel 4>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 6ifx_tapi_ChannelPrepare: nChannel 5>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 7ifx_tapi_ChannelPrepare: nChannel 6>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 8ifx_tapi_ChannelPrepare: nChannel 7>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 9[40] Allocate resource 145, FreeResource = 5Lantiq VMMC device driver, version 1.9.0.4, (c) 2006-2010 Lantiq Deutschland GmbHvpe1_mem = 200000stlb = 0, vpe0_wired = 0 vpe1_wired=1Wired TLB entries for Linux read_c0_wired() = 0VMMC_Open : Major 122 Minor 10VMMC_LL_Open: 8121a61cVMMC_Open --> 82a2fdb4VMMC_handle[0] : 82a2fdb4VMMC_Open : Major 122 Minor 11VMMC_LL_Open: 8121a68cVMMC_Open --> 82a2fd98VMMC_handle[1] : 82a2fd98VMMC_Open : Major 122 Minor 12VMMC_LL_Open: 8121a6d4VMMC_Open --> 82a2fd7cVMMC_handle[2] : 82a2fd7cVMMC_Open : Major 122 Minor 13VMMC_LL_Open: 8121a71cVMMC_Open --> 82a2fd60VMMC_handle[3] : 82a2fd60VMMC_Open : Major 122 Minor 14VMMC_LL_Open: 8121a764VMMC_Open --> 82a2fd44VMMC_handle[4] : 82a2fd44VMMC_Open : Major 122 Minor 15VMMC_LL_Open: 8121a7acVMMC_Open --> 82a2fd28VMMC_handle[5] : 82a2fd28VMMC_Open : Major 122 Minor 16VMMC_LL_Open: 8121a7f4VMMC_Open --> 82a2fd0cVMMC_handle[6] : 82a2fd0cVMMC_Open : Major 122 Minor 17VMMC_LL_Open: 8121a83cVMMC_Open --> 82a2fcf0VMMC_handle[7] : 82a2fcf0VMMC_Open : Major 122 Minor 18VMMC_LL_Open: 8121a884VMMC_Open --> 82a2fcd4VMMC_handle[8] : 82a2fcd4[40] Allocate resource 146, FreeResource = 6[40] Allocate resource 147, FreeResource = 7>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 10[get_vcpufirmware_address] DSP firmware: [5 -1], dCnt:1Unzipping from B16BD000 to 852DE9C8 ... [ZIP 2] modem state = 00000000[xDSL] vinax_modem_state = 0x0000doneUncompressed size = 526476IFX_MPS: Download firmware (size 526476 bytes)...cpu1_base_addr 87f00000 (0)VPE loader: VPE1 running successfullyPKCS12_PBE_add>PKCS12_PBE_add> support RC4PKCS12_PBE_add> support DESPKCS12_PBE_add> support RC2VFS_eventTsk() Event handling task start-up...[dhcp_clt] enable dhcp client in interface ATM1[3][USBLPT] Printer Initialize Fail : Plug Out !!padmin_task_entry() task running********** upnp_main() Unsupportted UPnP root device[0]: UPnPupnp_main(1-0) Run-up UPnP device IGD...readXML: fname=/igd.xmlTR64DBUG::TR64_Main> Start:TR64DBUG::TR64_Main> ServiceTable @ 0x808E4630, ServiceNum= 369098752TR64DBUG::TR64_Init> Start:[Auto-Cfg VC] Original PVC=8/32, IFNO=3hr_daemon> port 32769.[USB] dwc3884_start() Core id:0, funcIdx:5setSynopsisPower() check clock gating...pll0 N = 124, M = 8, PLL_BP = 0, PLL_EN = 1pll1 N = 64, M = 5, K_hi = 467, K_lo = 659, phdiven = 1, dsmsel = 1, modulo = 2 PLL_BP = 0 PLL_EN = 1pll2 N = 11, M = 0, PLL_BP = 0, PLL_EN = 1 do_div error ???pll0_fosc = 1000000000 do_div error ???pll1_fosc = 392934082pll2_fosc = 864000000cpu clock = 500000000DDR clock = 250000000FPI bus 1 = 250000000FPI bus 2 = 250000000PP32 clock = 432000000 do_div error ???PCI clock = 33333333Ethernet MII0= 50000000Ethernet MII1= 50000000 *IFX_CGU_IF_CLK 10e08008USB clock = 12000000Clockout0 = 0Clockout1 = 0Clockout2 = 0Clockout3 = 0ifx_get_fpi_hz 250000000*IFX_CGU_IF_CLK 10e0800bsetSynopsisPower() set power...ifx_pmu_set: PMU_PWDCR0 = 0x86118093 module 6 regid 0 regbit 6ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module USB0-CTRL has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0x86118093 module 27 regid 0 regbit 27ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module USB1-CTRL has been activated 1 times beforesetSynopsisPower() USB PHY configurations...setSynopsisPower() set PMU...ifx_pmu_set: PMU_PWDCR0 = 0x86118092 module 0 regid 0 regbit 0ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module USB0-PHY has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0x82118092 module 26 regid 0 regbit 26ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module USB1-PHY has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0x82118092 module 9 regid 0 regbit 9ifx_pmu_set: Module DSL-DFE has been activated 3 times beforeifx_pmu_set: PMU_PWDCR0 = 0x82110092 module 15 regid 0 regbit 15ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module AHBM has been activated 1 times before[USB] dwc3884_start() DWC3884 core version:0x4F54281A, 2.81a, channel:16[USB] dwc3884_reset(XR9) Reset In, core_id:0[USB] dwc3884_reset(VR9) IFX_RCU_USB0_CFG:0xBF203018, var:0x00001480[USB] dwc3884_reset(VR9) IFX_RCU_USB1_CFG:0xBF203034, var:0x00001400[USB] dwc3884_reset(VR9) IFX_RCU_RST_REQ:0xBF203010[USB] dwc3884_reset() rstctl:0xBE101010[USB] dwc3884_start() intsts:0xBE101014, var:0x54000029ptp Daemon task runninglpd Daemon task running[USB ROOTHUB_LOOP] RUNTASK id=53 lpd_main ...[USB] lpd_init() End.printer schedule task runningupnp_Init(0) upnpGlobalInit[1]:0MEI_DRV: Cntrl Thr Enter - VnxCtrlpCurr->eventWaitQueue=47pCurr->eventWaitQueue=47Autoboot State: firmwareReady##### [IFXOS_ThreadInit] name <autbtex>, tid 56, nStackSize=10000##### [IFXOS_ThreadInit] name <pmex_ne>, tid 57, nStackSize=10000##### [IFXOS_ThreadInit] name <pmex_fe>, tid 58, nStackSize=10000pCurr->eventWaitQueue=47DSL_CPE: Device initialized succeeded (ret=0).pCurr->eventWaitQueue=47Autoboot State: InitDSL_CPE_Event_S_AutobootStatusHandle callednReturn=0 nData="67C3 0001 0001 "StatusData.nStatus=1>>>>>> usbd_new_device: adding unit bus:1, addr=1, rev=0200, class=9, subclass=0, protocol=1, maxpacket=64, len=18, speed=3usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OKusbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1usbd_open_pipe_intr: ipipe=8667CD40 repeat=0 xfer=A5F037A0pCurr->eventWaitQueue=47set dms 67C3 1B 1 2300nReturn=0 nData="67C3 001B 0001 "pCurr->eventWaitQueue=47StatusData.nStatus=2Autoboot State: Trainmodem state = 00000100[xDSL] vinax_modem_state = 0x0100usbd_probe_and_attach,probe 1![USB] dwc3884_start() Core id:1, funcIdx:6[USB] dwc3884_start() DWC3884 core version:0x4F54281A, 2.81a, channel:16[USB] dwc3884_reset(XR9) Reset In, core_id:1[USB] dwc3884_reset() rstctl:0xBE106010[USB] dwc3884_start() intsts:0xBE106014, var:0x54000029>>>>>> usbd_new_device: adding unit bus:2, addr=1, rev=0200, class=9, subclass=0, protocol=1, maxpacket=64, len=18, speed=3usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OKusbd_open_pipe_intr: addr:1, ep address=0x81 flags=0x4 len=1usbd_open_pipe_intr: ipipe=8667D4C0 repeat=0 xfer=A5F0B7E0SSDP Initialization completed...readXML: fname=/tr64_igd.xml>> Parse Service 'urn:dslforum-org:service:DeviceInfo:1' : TRUE>> Parse Service 'urn:dslforum-org:service:DeviceConfig:1' : TRUE>> Parse Service 'urn:dslforum-org:service:LANEthernetInterfaceConfig:1' : TRUE>> Parse Service 'urn:dslforum-org:service:WLANConfiguration:1' : TRUE>> Parse Device 'urn:dslforum-org:device:LANDevice:1' : TRUE>> Parse Service 'urn:dslforum-org:service:WANDSLInterfaceConfig:1' : TRUE>> Parse Service 'urn:dslforum-org:service:WANPPPConnection:1' : TRUE>> Parse Device 'urn:dslforum-org:device:WANConnectionDevice:1' : TRUE>> Parse Device 'urn:dslforum-org:device:WANDevice:1' : TRUE>> Parse Device 'urn:dslforum-org:device:InternetGatewayDevice:1' : TRUETR64DBUG::TR64_Init> tr64_pDevRoot->szDescUrl: "http://19 2.168.1.1/tr64_igd.xml"TR64DBUG::TR64_InitReqList> Start:TR64DBUG::TR64_InitReqList> End.TR64::TR64_Init> RUNTASK id=59 TR64_ProcessRequest...>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]TR64DBUG::TR64_Init> End.TR64DBUG::TR64_Main> End.usbd_probe_and_attach,probe 1!startExplore() usb explore task run-up, slot:0, tsk_id:34, reason:0usb_hc_install_interrupt() Install OTG-1 interrupt 54IrqConnect : IRQ = 54, Handler = 0x803A79A4IrqConnect : IRQ = 60, Handler = 0x803AC304usb_hc_install_interrupt() Install OTG-2 interrupt 83IrqConnect : IRQ = 83, Handler = 0x803A79D0USB Module: Version 2.0.0 build Mar 9 2012 18:05:03usb_explore_task() Begin ...GenaInit : event_hook is NULL!!>> Parse Service 'urn:schemas-microsoft-com:service:OSInfo:1' : TRUE>> Parse Service 'urn:schemas-upnp-org:service:Layer3Forwarding:1' : TRUE>> Parse Service 'urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1' : TRUE>> Parse Service 'urn:schemas-upnp-org:service:WANEthernetLinkConfig:1' : TRUE>> Parse Service 'urn:schemas-upnp-org:service:WANPPPConnection:1' : TRUE>> Parse Service 'urn:schemas-upnp-org:service:WANIPConnection:1' : TRUE>> Parse Device 'urn:schemas-upnp-org:device:WANConnectionDevice:1' : TRUE>> Parse Device 'urn:schemas-upnp-org:device:WANDevice:1' : TRUE>> Parse Device 'urn:schemas-upnp-org:device:InternetGatewayDevice:1' : TRUE********** upnp_main1() Record pDevRoot[1]:829e14dc>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>> UPNP init IGD device successfully ...upnp_main(2-0) Run-up UPnP device TR64...readXML: fname=/tr64_igd.xmlupnp_Init(0) upnpGlobalInit[2]:0>> Parse Service 'urn:dslforum-org:service:DeviceInfo:1' : TRUE>> Parse Service 'urn:dslforum-org:service:DeviceConfig:1' : TRUE>> Parse Service 'urn:dslforum-org:service:LANEthernetInterfaceConfig:1' : TRUE>> Parse Service 'urn:dslforum-org:service:WLANConfiguration:1' : TRUE>> Parse Device 'urn:dslforum-org:device:LANDevice:1' : TRUE>> Parse Service 'urn:dslforum-org:service:WANDSLInterfaceConfig:1' : TRUE>> Parse Service 'urn:dslforum-org:service:WANPPPConnection:1' : TRUE>> Parse Device 'urn:dslforum-org:device:WANConnectionDevice:1' : TRUE>> Parse Device 'urn:dslforum-org:device:WANDevice:1' : TRUE>> Parse Device 'urn:dslforum-org:device:InternetGatewayDevice:1' : TRUE********** upnp_main1() Record pDevRoot[2]:829b4c20TR64DBUG::TR64_UPnPInit> Start:>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [1]>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>> UPNP init TR64 device successfully ...upnp_main(3-0) Run-up UPnP device WPS-WCN...readXML: fname=/wcn.xmlupnp_Init(0) upnpGlobalInit[3]:0>> Parse Service 'urn:schemas-wifialliance-org:service:WFAWLANConfig:1' : TRUE>> Parse Device 'urn:schemas-wifialliance-org:device:WFADevice:1' : TRUE********** upnp_main1() Record pDevRoot[3]:8299f2cc>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]>>>> UPNP init WPS-WCN device successfully ...upnp_main(4-0) Run-up UPnP device AV Media Server...readXML: fname=/avServer.xmlupnp_Init(0) upnpGlobalInit[4]:0>> Parse Service 'urn:schemas-upnp-org:service:ConnectionManager:1' : TRUE>> Parse Service 'urn:schemas-upnp-org:service:ContentDirectory:1' : TRUE>> Parse Service 'urn:microsoft.com:service:X_MS_MediaReceiverRegistrar:1' : TRUE>> Parse Device 'urn:schemas-upnp-org:device:MediaServer:1' : TRUE********** upnp_main1() Record pDevRoot[4]:82993cf8>>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]QueryCurrentConnectionIDs....>>>> UPNP init AV Media Server device successfully ...********** upnp_main() Unsupportted UPnP root device[5]: AV Media Renderer********** upnp_main() Unsupportted UPnP root device[6]: Printermodem state = 00000200[xDSL] vinax_modem_state = 0x0200IFXOS_EventWait: -20ifx_mps_get_fw_version: ifx_mps_mbx_write_message...ifx_mps_get_fw_version: Before sleepifx_mps_get_fw_version: After sleep!ifx_mps_get_fw_version: ifx_mps_mbx_read_message retval 0 bytes_read 8ok!Version 2.1.1.7.0 up and running...VMMC_TAPI_LL_FW_Start: ifx_mps_ioctl ret 0IFX_TAPI_Phone_Init: TAPI FW_Start 0[40] Allocate resource 148, FreeResource = 8[40] Allocate resource 149, FreeResource = 9[40] Allocate resource 150, FreeResource = 10[40] Allocate resource 151, FreeResource = 11[40] Allocate resource 152, FreeResource = 12[40] Allocate resource 153, FreeResource = 13[40] Allocate resource 154, FreeResource = 14[40] Allocate resource 155, FreeResource = 15[40] Allocate resource 156, FreeResource = 16[40] Allocate resource 157, FreeResource = 17[40] Allocate resource 158, FreeResource = 18[40] Allocate resource 159, FreeResource = 19[40] Allocate resource 160, FreeResource = 20[40] Allocate resource 161, FreeResource = 21[40] Allocate resource 162, FreeResource = 22[40] Allocate resource 163, FreeResource = 23[40] Allocate resource 164, FreeResource = 24[40] Allocate resource 165, FreeResource = 25[40] Allocate resource 166, FreeResource = 26[40] Allocate resource 167, FreeResource = 27[40] Allocate resource 168, FreeResource = 28[40] Allocate resource 169, FreeResource = 29[40] Allocate resource 170, FreeResource = 30[40] Allocate resource 171, FreeResource = 31[40] Allocate resource 172, FreeResource = 32[40] Allocate resource 173, FreeResource = 33[40] Allocate resource 174, FreeResource = 34[40] Allocate resource 175, FreeResource = 35[40] Allocate resource 176, FreeResource = 36[40] Allocate resource 177, FreeResource = 37[40] Allocate resource 178, FreeResource = 38[40] Allocate resource 179, FreeResource = 39[40] Allocate resource 180, FreeResource = 40IFXOS_EventWait: -20IFXOS_EventWait: -20IFXOS_EventWait: -20IFXOS_EventWait: -20IFXOS_EventWait: -20VMMC_TAPI_LL_FW_Init: VMMC_ALM_SmartSLIC_ChGet 2 FXO 0 2FWCAP: nPCM: 8 nALM: 2 nSIG: 5 nCOD: 5 nDECT: 6FWCAP: nNLEC: 4 nWLEC: 4 nES: 4 nAGC: 5 nFAX: 5FWCAP: nUTG:16 UTG/CH: 2 nMFTD: 5 nLIN: 2FWCAP: nDTMFR: 5 nDTMFG: 5 nCIDS: 5 nCIDR: 5VMMC_AddCaps: CODECS = 4cfIFXOS_EventWait: -20IFXOS_EventWait: -20IFXOS_EventWait: -20IFXOS_EventWait: -20IFXOS_EventWait: -20>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 11[40] Allocate resource 181, FreeResource = 41>>>>>>>>>>>>>>>>>>>>>>>>> IFXOS_EventInit event number 12[40] Allocate resource 182, FreeResource = 42IFXOS_EventWait: -20IFXOS_EventWait: -20IFXOS_EventWait: -20IFXOS_EventWait: -20IFX_TAPI_Phone_Init: TAPI BBD_Dnld 0===>Set PCM I/F 0 VMMC_handle:82a2fdb4IFX_TAPI_Phone_Init: TAPI FW_Start 0===> VMMC_Ioctl: Phone 1 IFX_TAPI_LINE_TYPE ok! VMMC_Ioctl: Phone 1 IFXPHONE_SET_LINEFEED ok! VMMC_Ioctl: Phone 1 IFX_TAPI_MAP_DATA_ADD ok!Set PCM I/F 1 VMMC_handle:82a2fd98IFX_TAPI_Phone_Init: TAPI FW_Start 0===> VMMC_Ioctl: Phone 2 IFX_TAPI_LINE_TYPE ok! VMMC_Ioctl: Phone 2 IFXPHONE_SET_LINEFEED ok! VMMC_Ioctl: Phone 2 IFX_TAPI_MAP_DATA_ADD ok!Set PCM I/F 2 VMMC_handle:82a2fd7cIFX_TAPI_Phone_Init: TAPI FW_Start 0===>Set PCM I/F 3 VMMC_handle:82a2fd60IFX_TAPI_Phone_Init: TAPI FW_Start 0===>Set PCM I/F 4 VMMC_handle:82a2fd44IFX_TAPI_Phone_Init: TAPI FW_Start 0===>Set PCM I/F 5 VMMC_handle:82a2fd28IFX_TAPI_Phone_Init: TAPI FW_Start 0===>Set PCM I/F 6 VMMC_handle:82a2fd0cIFX_TAPI_Phone_Init: TAPI FW_Start 0===>Set PCM I/F 7 VMMC_handle:82a2fcf0IFX_TAPI_Phone_Init: TAPI FW_Start 0===>Set PCM I/F 8 VMMC_handle:82a2fcd4Setting HOOK Related Parameters 0Setting HOOKFLASH_TIME min 50 ms max 350 msSetting HOOKON_TIME min 320 max 320Setting HOOK Related Parameters 1Setting HOOKFLASH_TIME min 50 ms max 350 msSetting HOOKON_TIME min 320 max 320Setting HOOK Related Parameters 2Setting HOOK Related Parameters 3RUNTASK id=31 VINETIC_DRV_Task...[33] Allocate mailbox 25RUNTASK id=33 VINETIC_T38_Task...RUNTASK id=62 FXO_flash_task...RUNTASK id=61 VOICE_API_task...************** Enable ProDaaCheckInterrupt() detect 8465Reset Duslic High begin1: R01=ff2: R01=ff3: R01=ff4: R01=ff5: R01=ff6: R01=ff7: R01=ff8: R01=ff9: R01=ff10: R01=ff11: R01=ff12: R01=ff13: R01=ff14: R01=ff15: R01=ff16: R01=ff17: R01=ff18: R01=ffapAppInit called 2????pci_init 1ifx_pmu_set: PMU_PWDCR0 = 0x80110092 module 15 regid 0 regbit 15ifx_pmu_set: Module AHBM has been activated 2 times beforeifx_pmu_set: PMU_PWDCR0 = 0x80110092 module 13 regid 0 regbit 13ifx_pmu_set: Module AHBS has been activated 2 times beforecall pcie_gpio_ep_reset_init ...pcie_gpio_ep_reset_init : reset pin 21ifx_pmu_set: PMU_PWDCR1 = 0x0000006f module 32 regid 1 regbit 0ifx_pmu_set: Actual disabling..........2ifx_pmu_set: Module PCIE-PHY disactivated!!!ifx_pmu_set: PMU_PWDCR1 = 0x0000006f module 36 regid 1 regbit 4ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PDI has been activated 1 times beforeifx_pmu_set: PMU_PWDCR1 = 0x0000006e module 32 regid 1 regbit 0ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PCIE-PHY has been activated 1 times beforeifx_pmu_set: PMU_PWDCR1 = 0x0000006c module 33 regid 1 regbit 1ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PCIE-CTRL has been activated 1 times beforeifx_pmu_set: PMU_PWDCR0 = 0x00110092 module 31 regid 0 regbit 31ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module PCIE_L0_CLK has been activated 1 times beforeifx_pmu_set: PMU_PWDCR1 = 0x0000004c module 37 regid 1 regbit 5ifx_pmu_set: Actual enabling.......... 1ifx_pmu_set: Module MSI has been activated 1 times beforepciauto_assign_resources : bus 1pciauto_bus_scan : current_bus 1pciauto_bus_scan : pci_devfn 0ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????pciauto_bus_scan : pci_devfn 1pciauto_bus_scan : pci_devfn 2pciauto_bus_scan : pci_devfn 3pciauto_bus_scan : pci_devfn 4pciauto_bus_scan : pci_devfn 5pciauto_bus_scan : pci_devfn 6pciauto_bus_scan : pci_devfn 7pciauto_bus_scan : pci_devfn 8pciauto_bus_scan : pci_devfn 9pciauto_bus_scan : pci_devfn apciauto_bus_scan : pci_devfn bpciauto_bus_scan : pci_devfn cpciauto_bus_scan : pci_devfn dpciauto_bus_scan : pci_devfn epciauto_bus_scan : pci_devfn fpciauto_bus_scan : pci_devfn 10pciauto_bus_scan : pci_devfn 11pciauto_bus_scan : pci_devfn 12pciauto_bus_scan : pci_devfn 13pciauto_bus_scan : pci_devfn 14pciauto_bus_scan : pci_devfn 15pciauto_bus_scan : pci_devfn 16pciauto_bus_scan : pci_devfn 17pciauto_bus_scan : pci_devfn 18pciauto_bus_scan : pci_devfn 19pciauto_bus_scan : pci_devfn 1apciauto_bus_scan : pci_devfn 1bpciauto_bus_scan : pci_devfn 1cpciauto_bus_scan : pci_devfn 1dpciauto_bus_scan : pci_devfn 1epciauto_bus_scan : pci_devfn 1fpciauto_bus_scan : pci_devfn 20pciauto_bus_scan : pci_devfn 21pciauto_bus_scan : pci_devfn 22pciauto_bus_scan : pci_devfn 23pciauto_bus_scan : pci_devfn 24pciauto_bus_scan : pci_devfn 25pciauto_bus_scan : pci_devfn 26pciauto_bus_scan : pci_devfn 27pciauto_bus_scan : pci_devfn 28pciauto_bus_scan : pci_devfn 29pciauto_bus_scan : pci_devfn 2apciauto_bus_scan : pci_devfn 2bpciauto_bus_scan : pci_devfn 2cpciauto_bus_scan : pci_devfn 2dpciauto_bus_scan : pci_devfn 2epciauto_bus_scan : pci_devfn 2fpciauto_bus_scan : pci_devfn 30pciauto_bus_scan : pci_devfn 31pciauto_bus_scan : pci_devfn 32pciauto_bus_scan : pci_devfn 33pciauto_bus_scan : pci_devfn 34pciauto_bus_scan : pci_devfn 35pciauto_bus_scan : pci_devfn 36pciauto_bus_scan : pci_devfn 37pciauto_bus_scan : pci_devfn 38pciauto_bus_scan : pci_devfn 39pciauto_bus_scan : pci_devfn 3apciauto_bus_scan : pci_devfn 3bpciauto_bus_scan : pci_devfn 3cpciauto_bus_scan : pci_devfn 3dpciauto_bus_scan : pci_devfn 3epciauto_bus_scan : pci_devfn 3fpciauto_bus_scan : pci_devfn 40pciauto_bus_scan : pci_devfn 41pciauto_bus_scan : pci_devfn 42pciauto_bus_scan : pci_devfn 43pciauto_bus_scan : pci_devfn 44pciauto_bus_scan : pci_devfn 45pciauto_bus_scan : pci_devfn 46pciauto_bus_scan : pci_devfn 47pciauto_bus_scan : pci_devfn 48pciauto_bus_scan : pci_devfn 49pciauto_bus_scan : pci_devfn 4apciauto_bus_scan : pci_devfn 4bpciauto_bus_scan : pci_devfn 4cpciauto_bus_scan : pci_devfn 4dpciauto_bus_scan : pci_devfn 4epciauto_bus_scan : pci_devfn 4fpciauto_bus_scan : pci_devfn 50pciauto_bus_scan : pci_devfn 51pciauto_bus_scan : pci_devfn 52pciauto_bus_scan : pci_devfn 53pciauto_bus_scan : pci_devfn 54pciauto_bus_scan : pci_devfn 55pciauto_bus_scan : pci_devfn 56pciauto_bus_scan : pci_devfn 57pciauto_bus_scan : pci_devfn 58pciauto_bus_scan : pci_devfn 59pciauto_bus_scan : pci_devfn 5apciauto_bus_scan : pci_devfn 5bpciauto_bus_scan : pci_devfn 5cpciauto_bus_scan : pci_devfn 5dpciauto_bus_scan : pci_devfn 5epciauto_bus_scan : pci_devfn 5fpciauto_bus_scan : pci_devfn 60pciauto_bus_scan : pci_devfn 61pciauto_bus_scan : pci_devfn 62pciauto_bus_scan : pci_devfn 63pciauto_bus_scan : pci_devfn 64pciauto_bus_scan : pci_devfn 65pciauto_bus_scan : pci_devfn 66pciauto_bus_scan : pci_devfn 67pciauto_bus_scan : pci_devfn 68pciauto_bus_scan : pci_devfn 69pciauto_bus_scan : pci_devfn 6apciauto_bus_scan : pci_devfn 6bpciauto_bus_scan : pci_devfn 6cpciauto_bus_scan : pci_devfn 6dpciauto_bus_scan : pci_devfn 6epciauto_bus_scan : pci_devfn 6fpciauto_bus_scan : pci_devfn 70pciauto_bus_scan : pci_devfn 71pciauto_bus_scan : pci_devfn 72pciauto_bus_scan : pci_devfn 73pciauto_bus_scan : pci_devfn 74pciauto_bus_scan : pci_devfn 75pciauto_bus_scan : pci_devfn 76pciauto_bus_scan : pci_devfn 77pciauto_bus_scan : pci_devfn 78pciauto_bus_scan : pci_devfn 79pciauto_bus_scan : pci_devfn 7apciauto_bus_scan : pci_devfn 7bpciauto_bus_scan : pci_devfn 7cpciauto_bus_scan : pci_devfn 7dpciauto_bus_scan : pci_devfn 7epciauto_bus_scan : pci_devfn 7fpciauto_bus_scan : pci_devfn 80pciauto_bus_scan : pci_devfn 81pciauto_bus_scan : pci_devfn 82pciauto_bus_scan : pci_devfn 83pciauto_bus_scan : pci_devfn 84pciauto_bus_scan : pci_devfn 85pciauto_bus_scan : pci_devfn 86pciauto_bus_scan : pci_devfn 87pciauto_bus_scan : pci_devfn 88pciauto_bus_scan : pci_devfn 89pciauto_bus_scan : pci_devfn 8apciauto_bus_scan : pci_devfn 8bpciauto_bus_scan : pci_devfn 8cpciauto_bus_scan : pci_devfn 8dpciauto_bus_scan : pci_devfn 8epciauto_bus_scan : pci_devfn 8fpciauto_bus_scan : pci_devfn 90pciauto_bus_scan : pci_devfn 91pciauto_bus_scan : pci_devfn 92pciauto_bus_scan : pci_devfn 93pciauto_bus_scan : pci_devfn 94pciauto_bus_scan : pci_devfn 95pciauto_bus_scan : pci_devfn 96pciauto_bus_scan : pci_devfn 97pciauto_bus_scan : pci_devfn 98pciauto_bus_scan : pci_devfn 99pciauto_bus_scan : pci_devfn 9apciauto_bus_scan : pci_devfn 9bpciauto_bus_scan : pci_devfn 9cpciauto_bus_scan : pci_devfn 9dpciauto_bus_scan : pci_devfn 9epciauto_bus_scan : pci_devfn 9fpciauto_bus_scan : pci_devfn a0pciauto_bus_scan : pci_devfn a1pciauto_bus_scan : pci_devfn a2pciauto_bus_scan : pci_devfn a3pciauto_bus_scan : pci_devfn a4pciauto_bus_scan : pci_devfn a5pciauto_bus_scan : pci_devfn a6pciauto_bus_scan : pci_devfn a7pciauto_bus_scan : pci_devfn a8pciauto_bus_scan : pci_devfn a9pciauto_bus_scan : pci_devfn aapciauto_bus_scan : pci_devfn abpciauto_bus_scan : pci_devfn acpciauto_bus_scan : pci_devfn adpciauto_bus_scan : pci_devfn aepciauto_bus_scan : pci_devfn afpciauto_bus_scan : pci_devfn b0pciauto_bus_scan : pci_devfn b1pciauto_bus_scan : pci_devfn b2pciauto_bus_scan : pci_devfn b3pciauto_bus_scan : pci_devfn b4pciauto_bus_scan : pci_devfn b5pciauto_bus_scan : pci_devfn b6pciauto_bus_scan : pci_devfn b7pciauto_bus_scan : pci_devfn b8pciauto_bus_scan : pci_devfn b9pciauto_bus_scan : pci_devfn bapciauto_bus_scan : pci_devfn bbpciauto_bus_scan : pci_devfn bcpciauto_bus_scan : pci_devfn bdpciauto_bus_scan : pci_devfn bepciauto_bus_scan : pci_devfn bfpciauto_bus_scan : pci_devfn c0pciauto_bus_scan : pci_devfn c1pciauto_bus_scan : pci_devfn c2pciauto_bus_scan : pci_devfn c3pciauto_bus_scan : pci_devfn c4pciauto_bus_scan : pci_devfn c5pciauto_bus_scan : pci_devfn c6pciauto_bus_scan : pci_devfn c7pciauto_bus_scan : pci_devfn c8pciauto_bus_scan : pci_devfn c9pciauto_bus_scan : pci_devfn capciauto_bus_scan : pci_devfn cbpciauto_bus_scan : pci_devfn ccpciauto_bus_scan : pci_devfn cdpciauto_bus_scan : pci_devfn cepciauto_bus_scan : pci_devfn cfpciauto_bus_scan : pci_devfn d0pciauto_bus_scan : pci_devfn d1pciauto_bus_scan : pci_devfn d2pciauto_bus_scan : pci_devfn d3pciauto_bus_scan : pci_devfn d4pciauto_bus_scan : pci_devfn d5pciauto_bus_scan : pci_devfn d6pciauto_bus_scan : pci_devfn d7pciauto_bus_scan : pci_devfn d8pciauto_bus_scan : pci_devfn d9pciauto_bus_scan : pci_devfn dapciauto_bus_scan : pci_devfn dbpciauto_bus_scan : pci_devfn dcpciauto_bus_scan : pci_devfn ddpciauto_bus_scan : pci_devfn depciauto_bus_scan : pci_devfn dfpciauto_bus_scan : pci_devfn e0pciauto_bus_scan : pci_devfn e1pciauto_bus_scan : pci_devfn e2pciauto_bus_scan : pci_devfn e3pciauto_bus_scan : pci_devfn e4pciauto_bus_scan : pci_devfn e5pciauto_bus_scan : pci_devfn e6pciauto_bus_scan : pci_devfn e7pciauto_bus_scan : pci_devfn e8pciauto_bus_scan : pci_devfn e9pciauto_bus_scan : pci_devfn eapciauto_bus_scan : pci_devfn ebpciauto_bus_scan : pci_devfn ecpciauto_bus_scan : pci_devfn edpciauto_bus_scan : pci_devfn eepciauto_bus_scan : pci_devfn efpciauto_bus_scan : pci_devfn f0pciauto_bus_scan : pci_devfn f1pciauto_bus_scan : pci_devfn f2pciauto_bus_scan : pci_devfn f3pciauto_bus_scan : pci_devfn f4pciauto_bus_scan : pci_devfn f5pciauto_bus_scan : pci_devfn f6pciauto_bus_scan : pci_devfn f7pciauto_bus_scan : pci_devfn f8pciauto_bus_scan : pci_devfn f9pciauto_bus_scan : pci_devfn fapciauto_bus_scan : pci_devfn fbpciauto_bus_scan : pci_devfn fcpciauto_bus_scan : pci_devfn fdpciauto_bus_scan : pci_devfn feafter pciauto_assign_resources ???Scanning bus 00pci_type=1 in pci_scan_slotpci_type=1dev->pci_type=1Found 00:00 [15d1/0011] 000604 01Early fixups, before probing the BARs !!!PCI: Calling quirk 80393140 for 00:00.0ifx_pcie_write_config : bus_number = 0 ????PCI: Calling quirk 80393160 for 00:00.0[KERN_INFO]ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridgeifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????pci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotFixups for bus 00Scanning behind PCI bridge 00:00.0, config ff0100, pass 0ifx_pcie_write_config : bus_number = 0 ????Scanning behind PCI bridge 00:00.0, config ff0100, pass 1ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????Scanning bus 01pci_type=1 in pci_scan_slotpci_type=1dev->pci_type=1Found 01:00 [1a30/0710] 000d80 00Early fixups, before probing the BARs !!!PCI: Calling quirk 80393140 for 01:00.0pci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotpci_type=1 in pci_scan_slotFixups for bus 01Bus scan for 01 returning with max=01ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????ifx_pcie_write_config : bus_number = 0 ????Bus scan for 00 returning with max=01IrqConnect : IRQ = 97, Handler = 0x80393AB0[KERN_INFO]IFX PCIe Root Complex driver, version 1.1.4, (c)2009 Infineon Technologies AGPCI: Calling quirk 80393E30 for 01:00.0check dev->cfg_size <= 256 ???????pcie_set_readrq : rq 80pcie_set_readrq : ctl 1fmsi_set_enable is called ???arch_setup_msi_irqs(236) is calledset_irq_msi : entry 85da448c irq 155call set_irq_msi ????get_irq_msi i 0 irq 155 : entry 85da448c irq 155get_irq_msi return 85da448ccall get_irq_msi ????pci_intx_for_msi is called ????pci_intx_for_msi is called ????pci_intx: enable 0msi_set_enable is called ???pci_init 2pci_find_slot bus 1 devfn 0dev->bus->number 0 dev->devfn 0dev->bus->number 1 dev->devfn 0PCI_AH_probe: Vendor_id=1A30,Device_id=710[HWLAN] devtag = 00000000[HWLAN] Vendor ID 0x1a30[HWLAN] Device ID 0x710[HWLAN] Base Addr 0xb8000000[HWLAN] SVendor ID 0x1a30[HWLAN] SDevice ID 0x711[HWLAN] Revision ID 0x1[HWLAN] interrupt vector 0x1Find PCI/PCIe interface at info=2 in tag=0[0]install irq 155IrqConnect : IRQ = 155, Handler = 0x8012C318[39] Allocate resource 183, FreeResource = 43pci_announce_device calledpci_announce_device calledset pci_type to 1dev=0x81be3a68 in _mtlk_pci_initdev->pci_type=1pcibios_set_master> lat=0x0PCI: Setting latency timer of device 01:00.0 to 64alloc_etherdev: name = wlan0alloc_etherdev> dev->priv = 0x8142D774 **********Get wlan0 dev=82BB8D68[39] Allocate event 339[39] Allocate event 340[39] Allocate event 341[39] Allocate event 342[39] Allocate event 343[39] Allocate event 344[39] Allocate event 345[39] Allocate event 346[39] Allocate event 347[39] Allocate event 348[39] Allocate event 349[39] Allocate event 350[39] Allocate event 351[39] Allocate event 352[39] Allocate event 353[39] Allocate event 354[39] Allocate event 355[39] Allocate event 356[39] Allocate event 357[39] Allocate event 358[39] Allocate event 359[39] Allocate event 360[39] Allocate event 361[39] Allocate event 362[39] Allocate event 363[39] Allocate event 364[39] Allocate event 365[39] Allocate event 366[39] Allocate event 367[39] Allocate event 368[39] Allocate event 369[39] Allocate event 370[39] Allocate event 371[39] Allocate event 372[39] Allocate event 373[39] Allocate event 374[39] Allocate event 375[39] Allocate event 376[39] Allocate event 377[39] Allocate event 378[39] Allocate event 379[39] Allocate event 380[39] Allocate event 381[39] Allocate event 382[39] Allocate event 383[39] Allocate event 384[39] Allocate event 385[39] Allocate event 386[39] Allocate event 387[39] Allocate event 388[39] Allocate event 389[39] Allocate event 390[39] Allocate event 391[39] Allocate event 392[39] Allocate event 393[39] Allocate event 394[39] Allocate event 395[39] Allocate event 396[39] Allocate event 397[39] Allocate event 398[39] Allocate event 399[39] Allocate event 400[39] Allocate event 401[39] Allocate event 402[39] Allocate event 403[39] Allocate event 404[39] Allocate event 405[39] Allocate event 406[39] Allocate resource 184, FreeResource = 44[39] Allocate event 407[39] Allocate event 408[39] Allocate event 409[39] Allocate resource 185, FreeResource = 45[39] Allocate event 410[39] Allocate event 411[39] Allocate event 412ap_upper.bin: @@@ VERSION INFO @@@ version number: FW_3.1.0_Customers_r5058 MIPS: Upper CPU(TMC AGG AP) interface: PCI phy type: real phy on Jan 22 2012 at 16:48:21@@@ END @@@contr_lm.bin: @@@ VERSION INFO @@@ version number: FW_3.1.0_Customers_r5058 MIPS: Lower MAC interface: -- phy type: real phy on Jan 22 2012 at 16:47:59@@@ END @@@mtlk_core_start : nic 8142d774 , hw 8142dd4419: R01=ffReset Duslic endProDAAInitialize: begin nowProDAAInitialize: Line-Side Device Status ffPort 2 sytem-side revision ff, line-side revision finit_DTMF_data: time 16399force_daa_offhook ch 2 onoff 1 time 16399ProDaaOffhook ff 2 onoff 1CID_Detect CH 2 onoff 0FXO_PolState_DTMFCID --> Disable DTMF CIDforce_daa_offhook ch 2 onoff 0 time 16458ProDaaOffhook ff 2 onoff 0CID_Detect CH 2 onoff 1failedFXO_PolState_DTMFCID --> Detect Polarity Changed Enable DTMF CIDFXS_FXO is talking now...Relay On now ch:0>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 3 chID 4>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 4 chID 5>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 5 chID 6>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 6 chID 7>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 7 chID 0>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 8 chID 0When * the value is 60000When * the value is 60000When * the value is 60000When * the value is 60000sys_voip_cfg->cpt.reorder = 425@-230;20(0.24/0.24/1)TEL_DRV_TONE_REORDER duration = 480[40] Allocate resource 186, FreeResource = 46[40] Allocate mailbox 26TEL_MGR_Init[40] Allocate resource 187, FreeResource = 47tel_mgr_mutex=187[40] Allocate mailbox 27 TEL_DM_Init[40] Allocate resource 188, FreeResource = 48[40] Allocate resource 189, FreeResource = 49 TEL_MGR_VoiceChannelInit TEL_MGR_SetVoiceChannel 1>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0 TEL_MGR_SetPhoneEC>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0VMMC_TAPI_LL_ALM_LEC_Set Ch 0 pLecConf->nOpMode 2 pLecConf->bNlp 1 TEL_MGR_SetPhoneVAD>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0VMMC_TAPI_LL_COD_VAD_Cfg CH 0 nVAD 0 TEL_MGR_SetPhoneGain>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0Gain Tx -2, Rx -9IFX_TAPI_LL_ALM_Volume_Set Ch 0 TxGain -2 RxGain -9 TEL_MGR_SetPhoneJitter>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 1 chID 0 TEL_MGR_SetVoiceChannel 2>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1 TEL_MGR_SetPhoneEC>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1VMMC_TAPI_LL_ALM_LEC_Set Ch 1 pLecConf->nOpMode 2 pLecConf->bNlp 1 TEL_MGR_SetPhoneVAD>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1VMMC_TAPI_LL_COD_VAD_Cfg CH 1 nVAD 0 TEL_MGR_SetPhoneGain>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1Gain Tx -2, Rx -9IFX_TAPI_LL_ALM_Volume_Set Ch 1 TxGain -2 RxGain -9 TEL_MGR_SetPhoneJitter>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 2 chID 1 TEL_MGR_SetVoiceChannel 5>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 5 chID 6 TEL_MGR_SetPhoneEC##@@!! TEL_MGR_SetPhoneEC: USB_DECT_Phone need to change here TEL_MGR_SetPhoneVAD>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 5 chID 6##@@!! VOICE_DRV_SetVAD: channelId 6 >= USB_DECT_CHANNEL_START 5 TEL_MGR_SetPhoneGain##@@!! TEL_MGR_SetPhoneGain: USB_DECT_Phone need to change here TEL_MGR_SetPhoneJitter##@@!! TEL_MGR_SetPhoneJitter: USB_DECT_Phone need to change here TEL_MGR_SetVoiceChannel 6>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 6 chID 7 TEL_MGR_SetPhoneEC##@@!! TEL_MGR_SetPhoneEC: USB_DECT_Phone need to change here TEL_MGR_SetPhoneVAD>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 6 chID 7##@@!! VOICE_DRV_SetVAD: channelId 7 >= USB_DECT_CHANNEL_START 5 TEL_MGR_SetPhoneGain##@@!! TEL_MGR_SetPhoneGain: USB_DECT_Phone need to change here TEL_MGR_SetPhoneJitter##@@!! TEL_MGR_SetPhoneJitter: USB_DECT_Phone need to change here TEL_MGR_SetVoiceChannel 7>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 7 chID 0 TEL_MGR_SetPhoneEC##@@!! TEL_MGR_SetPhoneEC: USB_DECT_Phone need to change here TEL_MGR_SetPhoneVAD>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 7 chID 0VMMC_TAPI_LL_COD_VAD_Cfg CH 0 nVAD 0 TEL_MGR_SetPhoneGain##@@!! TEL_MGR_SetPhoneGain: USB_DECT_Phone need to change here TEL_MGR_SetPhoneJitter##@@!! TEL_MGR_SetPhoneJitter: USB_DECT_Phone need to change here TEL_MGR_SetVoiceChannel 8>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 8 chID 0 TEL_MGR_SetPhoneEC##@@!! TEL_MGR_SetPhoneEC: USB_DECT_Phone need to change here TEL_MGR_SetPhoneVAD>>>> TEL_PORT_GetPhoneChannelId: phoneIdx = 8 chID 0VMMC_TAPI_LL_COD_VAD_Cfg CH 0 nVAD 0 TEL_MGR_SetPhoneGain##@@!! TEL_MGR_SetPhoneGain: USB_DECT_Phone need to change here TEL_MGR_SetPhoneJitter##@@!! TEL_MGR_SetPhoneJitter: USB_DECT_Phone need to change here[40] Allocate resource 190, FreeResource = 50[40] Allocate mailbox 28[65] Allocate resource 191, FreeResource = 51[65] Allocate resource 192, FreeResource = 52[SIP_CORE_Task] sip_core_readyTEL_MGR_SetVoipPhoneEvtHookFuncTEL_MGR_SetVoipPhoneEvtHookFuncTEL_MGR_SetVoipPhoneEvtHookFuncTEL_MGR_SetVoipPhoneEvtHookFuncTEL_MGR_SetVoipPhoneEvtHookFuncTEL_MGR_SetVoipPhoneEvtHookFuncTEL_MGR_SetVoipPhoneEvtHookFuncTEL_MGR_SetVoipPhoneEvtHookFunc[40] Allocate resource 193, FreeResource = 53[40] Allocate mailbox 29VOICE_IVR_Init: voice_ivr_channel[0].ivrQueueId = 29[40] Allocate mailbox 30VOICE_IVR_Init: voice_ivr_channel[1].ivrQueueId = 30[40] Allocate mailbox 31VOICE_IVR_Init: voice_ivr_channel[2].ivrQueueId = 31[40] Allocate mailbox 32VOICE_IVR_Init: voice_ivr_channel[3].ivrQueueId = 32[40] Allocate mailbox 33VOICE_IVR_Init: voice_ivr_channel[4].ivrQueueId = 33[40] Allocate mailbox 34VOICE_IVR_Init: voice_ivr_channel[5].ivrQueueId = 34[40] Allocate mailbox 35VOICE_IVR_Init: voice_ivr_channel[6].ivrQueueId = 35[40] Allocate mailbox 36VOICE_IVR_Init: voice_ivr_channel[7].ivrQueueId = 36TEL_MGR_DisableDebugTEL_IVR_CheckMICabort() Start !![39] Allocate event 413[39] Allocate event 414[39] Allocate event 415[39] Allocate resource 194, FreeResource = 54[39] Allocate event 416create mtlk kernel thread 8142d748running mtlk kernel thread 8142d748RUNTASK id=40(osdep 8142d748) Metalink kernel thread ...FXO_PCM_onoff 1init_FXO_CH: IFX_TAPI_PCM_ACTIVATION_SET 0 error!VMMC_TAPI_LL_PCM_Volume_Set Ch 2 TxGain -10 RxGain -2[reset_802dot1x] wireless module readyinit_wpa111111111=>configp->enableSSN =1wpa2flag=6wpa2flag=2111111111=>configp->enableSSN =3ie_set==>ie_set!enableSSN=3,SSNPSK=1WPA ie built!!!!!blob_set_attachmenti_set overgtk_setkeys111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0[reset_802dot1x] 802.1Xv2 ready[htf_dbg] - OnlineActiveWirless() 630mtlk dev_close ====>>>[eric_dbg] - Set1Xconfig() 114nRadio =0[eric_dbg] -Set1Xconfig to set WPA2/WPA,but no need in wave300===============OnlineActiveWirless to set RSN ie=============================OnlineActiveWirless to set RSN ie over==============mtlk dev_open ====>>>=================RSN check!!!===============================================RSN check over!!!==============================ifno2dot1x_if[2]=0ifno2dot1x_if[23]=81dot1x_wireless_if_mask=0x800004[reset_802dot1x] wireless module readyinit_wpa111111111=>configp->enableSSN =1wpa2flag=6wpa2flag=2111111111=>configp->enableSSN =3ie_set==>ie_set!enableSSN=3,SSNPSK=1WPA ie built!!!!!blob_set_attachmenti_set overgtk_setkeys111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0111111111=>configp->enableSSN =0[reset_802dot1x] 802.1Xv2 ready[onlineActive_mgmt_access]715 op:0*************************************************Wi-Fi Simple Config Application*****Version: Build 2.02.2.DTM1.1, Mar 9 2012 18:06:07*********************************************@#*@#*@#*EAP-WSC: Entered eap_wsc_init *#@*#@*#@wsc_Send_UPNP_packet> enterwsc_Send_eap_packet:udpFdupnp_wcn:2b;;udpFdupnp:2dEntered udp_read*******wlan_update_appie start***********================wlan_confree_set_ie()==================================wlan_confree_set_ie==================Config Method:0x84************************************************Waiting for Registrar to connect...************************************************

U-Boot 2010.06-LANTIQ-v-2.0.26-dirty (Jul 25 2011 - 09:16:19)CLOCK CPU 500M RAM 250MDRAM: 128 MiBFlash: 32 MiBIn: serialOut: serialErr: serialNet: fw_addr=0xa0200000Internal phy(FE) firmware version: 0x8200vr9 SwitchType "run flash_nfs" to mount root filesystem over NFsh*t any key to stop autoboot: 0 VR9 # help ? - alias for 'help'base - print or set address offsetbootm - boot application image from memorybootp - boot image via network using BOOTP/TFTP protocolcmp - memory comparecp - memory copycrc32 - checksum calculationecho - echo args to consoleerase - erase FLASH memoryflinfo - print FLASH memory informationgo - start application at address 'addr'help - print command description/usageloady - load binary file over serial line (ymodem mode)loop - infinite loop on address rangemd - memory displaymdio - mdio read and writemm - memory modify (auto-incrementing address)mtest - simple RAM read/write testmw - memory write (fill)nm - memory modify (constant address)ping - send ICMP ECHO_REQUEST to network hostprintenv- print environment variablesprotect - enable or disable FLASH write protectionrarpboot- boot image via network using RARP/TFTP protocolreset - Perform RESET of the CPUrun - run commands in an environment variablesaveenv - save environment variables to persistent storagesetenv - set environment variablessleep - delay execution for some timetftpboot- boot image via network using TFTP protocolupgrade - upgrade - forward/backward copy memory to pre-defined flash locationversion - print monitor versionVR9 # printenvbootdelay=3baudrate=115200preboot=echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echobootfile="uImage"mem=62Mphym=64Methaddr=00:E0:92:00:01:40netdev=eth0console=ttyS0baudrate=115200tftppath=loadaddr=0x80800000rootpath=/mnt/full_fsrootfsmtd=/dev/mtdblock4addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):onaddmisc=setenv bootargs $(bootargs) console=$(console),$(baudrate) ethaddr=$(ethaddr) phym=$(phym) mem=$(mem) panic=1 mtdparts=$(mtdparts) init=/etc/preinit Mu-boot=u-boot.lqrootfs=rootfs.imgfullimage=fullimage.imgjffs2image=root.jffs2-128k.nortotalimage=totalimage.imgflash_flash=run flashargs addip addmisc; bootm $(f_kernel_addr)update_uboot=tftpboot $(loadaddr) $(tftppath)$(u-boot); erase b0000000 +40000; cp.b $(loadaddr) b0000000 $(filesize); resetupdate_kernel=tftpboot $(loadaddr) $(tftppath)$(bootfile); erase $(f_kernel_addr) +$(f_kernel_size); cp.b $(loadaddr) $(f_kernel_addr) $(filesize)update_rootfs=tftpboot $(loadaddr) $(tftppath)$(rootfs); erase $(f_rootfs_addr) +$(f_rootfs_size); cp.b $(loadaddr) $(f_rootfs_addr) $(filesize)update_fullimage=tftpboot $(loadaddr) $(tftppath)$(fullimage); upgrade $(loadaddr) $(filesize)mtdparts=ifx_nor0:256k(uboot),256k(uboot_bin),128k(uboot_cfg),2m(kernel),10m(rootfs),11m(rootfs2),896k(sys_config),6m(supertask_img),1m(supertask_cfg),512k(s)reset_uboot_config=prot off 0xB0080000 0xB009FFFF; erase 0xB0080000 0xB009FFFFpart0_begin=0xB0000000part1_begin=0xB0040000part2_begin=0xB0080000part3_begin=0xB00A0000part4_begin=0xB02A0000part5_begin=0xB0CA0000part6_begin=0xB11A0000part7_begin=0xB1280000part8_begin=0xB1E80000part9_begin=0xB1F80000total_part=10flash_end=0xB1FFFFFFdata_block0=ubootdata_block1=uboot_bindata_block2=ubootconfigdata_block3=kerneldata_block4=rootfsdata_block5=rootfs2data_block6=sysconfigdata_block7=supertask_imgdata_block8=supertask_cfgdata_block9=supertask_bootcfgtotal_db=10f_uboot_addr=0xB0000000f_uboot_size=0x00040000f_uboot_bin_addr=0xB0040000f_uboot_bin_size=0x00040000f_ubootconfig_addr=0xB0080000f_ubootconfig_size=0x00020000f_ubootconfig_end=0xB009FFFFf_kernel_addr=0xB00A0000f_kernel_size=0x00200000f_kernel_end=IFX_CFG_FLASH_KERNEL_IMAGE_END_ADDRf_rootfs2_addr=0xB0CA0000f_rootfs2_size=0x00500000f_sysconfig_addr=0xB11A0000f_sysconfig_size=0x000E0000f_ddrconfig_addr=0xB007FFE8f_ddrconfig_size=24f_supertask_img_addr=0xB1280000f_supertask_img_size=0x00c00000f_supertask_cfg_addr=0xB1E80000f_supertask_cfg_size=0x00100000f_supertask_bootcfg_addr=0xB1F80000f_supertask_bootcfg_size=0x00080000update_jffs2image=tftpboot $(loadaddr) $(tftppath)$(jffs2image); erase $(f_rootfs_addr) +0x0ce0000; upgrade $(loadaddr) $(filesize)update_flash=tftp $(loadaddr) flash2.img; protect off b0800000 +800000; erase b0800000 +800000; cp.b $(loadaddr) b0800000 800000; tftp $(loadaddr) flash1.im0sw_version=01-01-101t1hw_version=VR9serial=00000000ethact=vr9 Switchfilesize=760040fileaddr=80800000f_rootfs_size=0x00760000f_rootfs_addr=0xb02a0000f_rootfs_end=0xb0a00000f_rootfs_crc=CCB93F36flashargs=setenv bootargs root=$(rootfsmtd) rw rootfstype=squashfs,jffs2 calibrateipaddr=192.168.1.1serverip=192.168.1.100io=trunk=setenv f_kernel_addr 0xB0CA0000;run flash_flashbootcmd=run trunkstdin=serialstdout=serialstderr=serial

ROM VER: 1.0.5CFG 01Tuning DDR beginDDR Access auto data-eye tuning Rev 0.3aDDR size from 0xa0000000 - 0xa7ffffffDDR check ok... start booting...=======================================================================Wireless ADSL IAD VR9 Loader v0.70.01 build Mar 26 2012 13:36:53 Arcadyan Technology Corporation=======================================================================A1x VR90xbe22ff1c : 702400000xBf203014 : 70240000MXIC MX29GL256EL top boot 16-bit mode foundCopying boot params.....DONEEnter command mode ...Emergency value : 19FLASH_AREA_IMAGE_0 is Linux, load image ...Ready to run firmwareU-Boot 2010.06-LANTIQ-v-2.0.26-dirty (Jul 25 2011 - 09:16:19)CLOCK CPU 500M RAM 250MDRAM: 128 MiBFlash: 32 MiBIn: serialOut: serialErr: serialNet: fw_addr=0xa0200000Internal phy(FE) firmware version: 0x8200vr9 SwitchType "run flash_nfs" to mount root filesystem over NFsh*t any key to stop autoboot: 0## Booting kernel from Legacy Image at b016da90 ... Image Name: MIPS IFXCPE Linux-2.6.20.19 Created: 2011-07-19 2:38:13 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1254704 Bytes = 1.2 MiB Load Address: 80002000 Entry Point: 803a6000 Verifying Checksum ... OK Uncompressing Kernel Image ... OKStarting kernel ...Infineon xDSL CPE VR9mips_hpt_frequency = 250000000, counter_resolution = 2Linux version 2.6.20.19 (ammon@debian-GccCompiler) (gcc version 3.4.6 (OpenWrt-2.0)) #5 Tue Jul 19 09:36:02 CST 2011phym = 08000000, mem = 07e00000, max_pfn = 00007e00Reserving memory for CP1 @0xa7e00000, size 0x00200000CPU revision is: 00019555Determined physical RAM map:User-defined physical RAM map: memory: 07e00000 @ 00000000 (usable)Built 1 zonelists. Total pages: 32004Kernel command line: root=/dev/mtdblock4 rw rootfstype=squashfs,jffs2 bridge mptest calibrate ip=192.168.2.1:192.168.2.100::::eth0:on console=ttyS0,115200 ethaddr=00:E0:92:00:01:40 phym=128M mem=126M panic=1 mtdparts=ifx_nor0:256k(uboot),256k(uboot_bin),128k(uboot_cfg),2m(kernel),10m(rootfs),11m(rootfs2),896k(sys_config),6m(supertask_img),1m(supertask_cfg),512k(supertask_bootcfg) init=/etc/preinit vpe1_load_addr=0x87e00000 vpe1_mem=2M1 MIPSR2 register sets availablePrimary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.Primary data cache 32kB, 4-way, linesize 32 bytes.Synthesized TLB refill handler (20 instructions).Synthesized TLB load handler fastpath (32 instructions).Synthesized TLB store handler fastpath (32 instructions).Synthesized TLB modify handler fastpath (31 instructions).Cache parity protection disabledLantiq ICU driver, version 3.0.1, (c) 2001-2010 Lantiq Deutschland GmbHPID hash table entries: 512 (order: 9, 2048 bytes)Using 250.000 MHz high precision timer.Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)Memory: 123648k/129024k available (2929k kernel code, 5340k reserved, 794k data, 164k init, 0k highmem)Security Framework v1.0.0 initializedMount-cache hash table entries: 512NET: Registered protocol family 16Lantiq PCI host controller driver, version 1.1.9, (c) 2001-2010 Lantiq Deutschland GmbHdrivers/char/ifxmips_gpio.c:777:ifx_gpio_pin_reserve: Pin ID 21 (port 1, pin 5) has been reserved by module PCI from kernel!Lantiq PCIe Root Complex driver, version 1.2.0, (c) 2001-2010 Lantiq Deutschland GmbHSCSI subsystem initializedusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridgePCI: Bridge: 0000:01:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: 1c000000-1cbfffffNET: Registered protocol family 8NET: Registered protocol family 20NET: Registered protocol family 2IP route cache hash table entries: 1024 (order: 0, 4096 bytes)TCP established hash table entries: 4096 (order: 2, 16384 bytes)TCP bind hash table entries: 2048 (order: 1, 8192 bytes)TCP: Hash tables configured (established 4096 bind 2048)TCP reno registeredgptu: totally 6 16-bit timers/countersgptu: misc_register on minor 63gptu: succeeded to request irq 118gptu: succeeded to request irq 119gptu: succeeded to request irq 120gptu: succeeded to request irq 121gptu: succeeded to request irq 122gptu: succeeded to request irq 123IFX DMA driver, version ifxmips_dma_core.c:v1.0.9,(c)2009 Infineon Technologies AGLantiq CGU driver, version 1.0.9, (c) 2001-2010 Lantiq Deutschland GmbHWired TLB entries for Linux read_c0_wired() = 0squashfs: version 3.2-r2 (2007/01/15) Phillip Loughersquashfs: LZMA suppport for slax.org by jroJFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.Infineon Technologies DEU driver version 1.0.1IFX DEU DES initialized (multiblock).IFX DEU AES initialized (multiblock).IFX DEU ARC4 initialized (multiblock).IFX DEU SHA1 initialized.IFX DEU MD5 initialized.IFX DEU SHA1_HMAC initialized.IFX DEU MD5_HMAC initialized.io scheduler noop registered (default)assign_interrupt_mode Found MSI capabilityifx_pmu_init: Major 252Lantiq PMU driver, version 1.1.4, (c) 2001-2010 Lantiq Deutschland GmbHLantiq GPIO driver, version 1.2.12, (c) 2001-2010 Lantiq Deutschland GmbHInfineon Technologies RCU driver version 1.0.6======= ifx_gpio_register(6) =======Lantiq LED Controller driver, version 1.0.4, (c) 2001-2010 Lantiq Deutschland GmbHMEI CPE Driver, Version 1.0.2<6>(c) Copyright 2009, Infineon Technologies AG<6>### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###<6>ttyS0 at MMIO 0xbe100c00 (irq = 105) is a IFX_ASCLantiq ASC (UART) driver, version 1.0.5, (c) 2001-2010 Lantiq Deutschland GmbHloop: loaded (max 8 devices)PPP generic driver version 2.4.2PPP Deflate Compression module registeredPPP BSD Compression module registeredPPP MPPE Compression module registeredNET: Registered protocol family 24IFX SWITCH API, Version 1.0.1SWAPI: Registered character device [switch_api] with major no [81]Switch API: PCE MicroCode loaded !!Switch Auto Polling value = 0GPHY FIRMWARE LOAD SUCCESSFULLY AT ADDR : 3f0000IFX GPHY driver FE Mode, version ifxmips_vr9_gphy: V0.6 - Firmware: 109ifx_nor0: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040ifx_nor0: CFI does not contain boot bank location. Assuming top.number of CFI chips: 1cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.10 cmdlinepart partitions found on MTD device ifx_nor0ifx_mtd_init flash0: Using dynamic image partitionCreating 10 MTD partitions on "ifx_nor0":0x00000000-0x00040000 : "uboot"0x00040000-0x00080000 : "uboot_bin"0x00080000-0x000a0000 : "uboot_cfg"0x000a0000-0x002a0000 : "kernel"0x002a0000-0x00ca0000 : "rootfs"0x00ca0000-0x017a0000 : "rootfs2"0x017a0000-0x01880000 : "sys_config"0x01880000-0x01e80000 : "supertask_img"0x01e80000-0x01f80000 : "supertask_cfg"0x01f80000-0x02000000 : "supertask_bootcfg"Lantiq MTD NOR driver, version 1.0.4, (c) 2001-2010 Lantiq Deutschland GmbH======= ifx_gpio_register(3) =======Lantiq SSC driver, version 2.2.2, (c) 2001-2010 Lantiq Deutschland GmbHusbcore: registered new interface driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driverInitializing USB Mass Storage driver...usbcore: registered new interface driver usb-storageUSB Mass Storage support registered.usbcore: registered new interface driver libusualusbcore: registered new interface driver usbserialdrivers/usb/serial/usb-serial.c: USB Serial support registered for genericusbcore: registered new interface driver usbserial_genericdrivers/usb/serial/usb-serial.c: USB Serial Driver coredrivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)usbcore: registered new interface driver optiondrivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1Registered led device: broadband_ledRegistered led device: internet_ledRegistered led device: ledc_2Registered led device: ledc_3Registered led device: ledc_4Registered led device: ledc_5Registered led device: ledc_6Registered led device: ledc_7Registered led device: ledc_8Registered led device: ledc_9Registered led device: ledc_10Registered led device: ledc_11Registered led device: wps_ledRegistered led device: ledc_13Registered led device: ledc_14Registered led device: usb2_link_ledRegistered led device: ledc_16Registered led device: ledc_17Registered led device: usb1_link_ledRegistered led device: fxo_act_ledRegistered led device: internet_red_ledRegistered led device: voip_ledRegistered led device: warning_ledRegistered led device: ledc_23Lantiq LED driver, version 1.0.15, (c) 2001-2010 Lantiq Deutschland GmbHu32 classifier Performance counters onnf_conntrack version 0.5.0 (1008 buckets, 8064 max)nf_ct_ftp: registering helper for pf: 2 port: 21nf_ct_ftp: registering helper for pf: 10 port: 21GRE over IPv4 tunneling driverip_tables: (C) 2000-2006 Netfilter Core Teamipt_time loadingTCP cubic registeredNET: Registered protocol family 1NET: Registered protocol family 17NET: Registered protocol family 8atmpvc_init() failed with -17lec.c: May 16 2011 16:31:56 initializedmpc.c: May 16 2011 16:31:52 initialized802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>All bugs added by David S. Miller <davem@redhat.com>Time: MIPS clocksource has been installed.VFS: Mounted root (jffs2 filesystem).Freeing unused kernel memory: 164k freedWarning: unable to open an initial console.Algorithmics/MIPS FPU Emulator v1.5rootdir=/table='/etc/device_table.txt'- preinit -Press CTRL-C for failsafe- config restore -mtd device could not be found for image sysconfig with addr 0xb11a0000read_img config.tgz failed, restore the default configconfig/config/rc.confconfig/firewall_etherconfig/dhcpconfig/fstabconfig/firewallconfig/sambaconfig/firewall_3gconfig/arc-middle/config/arc-middle/register/config/arc-middle/register/002-mid_dsl.regconfig/arc-middle/register/003-mid_switch.regconfig/arc-middle/register/004-mid_qos.regconfig/arc-middle/register/001-mid_ccfg.regconfig/firewall_vdslconfig/systemconfig/ulogd.confconfig/firewall.userconfig/firewall_adslconfig/timezonelistconfig/ntpclientconfig/ripd.confconfig/network-3gconfig/networkconfig/passwdconfig/glbcfg.dftconfig/.glbcfgconfig/firewall_lte- init -Please press Enter to activate this console. IFXUSB: ifxusb_hcd: version 3.0 B100913IFXUSB: USB core #0 soft-resetIFXUSB: USB core #0 soft-resetifxusb_hcd ifxusb_hcd: IFX USB Controllerifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1ifxusb_hcd ifxusb_hcd: irq 54, io mem 0xbe101000======= ifx_gpio_register(7) =======IFXUSB: Init: Power Port (0)usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 1 port detectedIFXUSB: USB core #1 soft-resetIFXUSB: USB core #1 soft-resetifxusb_hcd ifxusb_hcd: IFX USB Controllerifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 2ifxusb_hcd ifxusb_hcd: irq 83, io mem 0xbe106000IFXUSB: Init: Power Port (0)usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 1 port detectedIMQ starting with 2 devices...IMQ driver loaded successfully. Hooking IMQ before NAT on PREROUTING. Hooking IMQ after NAT on POSTROUTING.nf_conntrack_rtsp v0.6.21 loadingnf_nat_rtsp v0.6.21 loadingfuse init (API version 7.Coolfuse distribution version: 2.7.3IFXOS, Version 1.5.11<6>(c) Copyright 2007, Infineon Technologies AG<6>### IFXOS - IFXOS - IFXOS - IFXOS ###Lantiq CPE API Driver version: DSL CPE API V4.6.3.5-pd3Predefined debug level: 3ifxmips_ppa_datapath_vr9_a5: module license 'unspecified' taints kernel.Loading A5 (MII0/1 + ATM) driver ...... Succeeded!PPE datapath driver info: Version ID: 128.3.7.1.0.0.4 Family : N/A DR Type : Normal Data Path | Indirect-Fast Path Interface : MII0 | MII1 | ATM Mode : Routing Release : 0.0.4PPE firmware info: Version ID: 7.2.4.6.1.14 Family : VR9 FW Type : Acceleration Interface : MII0/1 + ATM Mode : Bridging + IPv4 Routing Release : 1.14device eth0 entered promiscuous modebr-lan: port 1(eth0) entering learning statebr-lan: topology change detected, propagatingbr-lan: port 1(eth0) entering forwarding statePPA API --- init successfullyifx_ppa_init - init succeededSuccessfullyFailed: -22userspace registering PIDifx_ppa_init - init succeededENTER - Kernel Thread Startup <autbtex><7>ENTER - Kernel Thread Startup <pmex_ne><7>ENTER - Kernel Thread Startup <pmex_fe><3>DSL[00]: WARNING - SRA not supported by the FWifx_ppa_init - init succeededSuccessfullyFailed: -22device eth1 entered promiscuous modebr-lan: port 2(eth1) entering learning statebr-lan: topology change detected, propagatingbr-lan: port 2(eth1) entering forwarding state

ROM VER: 1.1.4CFG 01U-Boot 2013.10-openwrt5-dirty (Jan 07 2014 - 10:29:58) arv7519rwBoard: Lantiq ARV7519RW VRX200 Family BoardSoC: Lantiq VRX288 v1.2CPU: 500 MHzIO: 250 MHzBUS: 250 MHzBOOT: NORDRAM: 128 MiBFlash: 32 MiBIn: serialOut: serialErr: serialNet: ltq-ethHit any key to stop autoboot: 0 ## Booting kernel from Legacy Image at b0080000 ... Image Name: MIPS OpenWrt Linux-3.10.24 Created: 2014-01-07 11:45:52 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1250111 Bytes = 1.2 MiB Load Address: 80002000 Entry Point: 80002000 Verifying Checksum ... OK Uncompressing Kernel Image ... OKStarting kernel ...[ 0.000000] Linux version 3.10.24 (gmtii@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39156) ) #1 Tue Jan 7 11:45:33 WET 2014[ 0.000000] SoC: VR9 rev 1.2[ 0.000000] bootconsole [early0] enabled[ 0.000000] CPU revision is: 00019556 (MIPS 34Kc)[ 0.000000] MIPS: machine is ARV7519 - Astoria Networks ARV7519RW22-A-LT[ 0.000000] Determined physical RAM map:[ 0.000000] memory: 08000000 @ 00000000 (usable)[ 0.000000] Initrd not found or empty - disabling initrd[ 0.000000] Zone ranges:[ 0.000000] Normal [mem 0x00000000-0x07ffffff][ 0.000000] Movable zone start for each node[ 0.000000] Early memory node ranges[ 0.000000] node 0: [mem 0x00000000-0x07ffffff][ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512[ 0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)[ 0.000000] Writing ErrCtl register=0002e9e0[ 0.000000] Readback ErrCtl register=0002e9e0[ 0.000000] Memory: 125972k/131072k available (2640k kernel code, 5100k reserved, 872k data, 188k init, 0k highmem)[ 0.000000] NR_IRQS:256[ 0.000000] CPU Clock: 500MHz[ 0.000000] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)[ 0.032000] pid_max: default: 32768 minimum: 301[ 0.036000] Mount-cache hash table entries: 512[ 0.040000] pinctrl core: initialized pinctrl subsystem[ 0.044000] NET: Registered protocol family 16[ 0.056000] pinctrl-xway 1e100b10.pinmux: Init done[ 0.060000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28[ 0.068000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV[ 0.072000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_assert[185][ 0.184000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_deassert[193][ 0.212000] bio: create slab <bio-0> at 0[ 0.216000] usbcore: registered new interface driver usbfs[ 0.220000] usbcore: registered new interface driver hub[ 0.224000] usbcore: registered new device driver usb[ 0.228000] PCI host bridge to bus 0000:00[ 0.232000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff][ 0.236000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff][ 0.240000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff][ 0.244000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge[ 0.256000] pci 0000:00:00.0: BAR 9: assigned [mem 0x1c000000-0x1cbfffff pref][ 0.260000] pci 0000:01:00.0: BAR 1: assigned [mem 0x1c000000-0x1c7fffff pref][ 0.264000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c800000-0x1c800fff pref][ 0.268000] pci 0000:00:00.0: PCI bridge to [bus 01][ 0.272000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cbfffff pref][ 0.276000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)[ 0.280000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1 [ 0.284000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned[ 0.288000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1 [ 0.292000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned[ 0.296000] Switching to clocksource MIPS[ 0.304000] NET: Registered protocol family 2[ 0.308000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)[ 0.312000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)[ 0.320000] TCP: Hash tables configured (established 1024 bind 1024)[ 0.328000] TCP: reno registered[ 0.332000] UDP hash table entries: 256 (order: 0, 4096 bytes)[ 0.336000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)[ 0.344000] NET: Registered protocol family 1[ 0.348000] gptu: totally 6 16-bit timers/counters[ 0.352000] gptu: misc_register on minor 63[ 0.356000] gptu: succeeded to request irq 126[ 0.360000] gptu: succeeded to request irq 127[ 0.364000] gptu: succeeded to request irq 128[ 0.368000] gptu: succeeded to request irq 129[ 0.376000] gptu: succeeded to request irq 130[ 0.380000] gptu: succeeded to request irq 131[ 0.384000] phy-xrx200 gphy-xrx200.8: requesting lantiq/vr9_phy11g_a2x.bin[ 0.392000] phy-xrx200 gphy-xrx200.8: booting GPHY0 firmware at 78C0000[ 0.400000] phy-xrx200 gphy-xrx200.8: booting GPHY1 firmware at 78C0000[ 0.508000] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.516000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.[ 0.524000] msgmni has been set to 246[ 0.528000] io scheduler noop registered[ 0.532000] io scheduler deadline registered (default)[ 0.540000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112) is a lantiq,asc[ 0.548000] console [ttyLTQ0] enabled, bootconsole disabled[ 0.548000] console [ttyLTQ0] enabled, bootconsole disabled[ 0.560000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e[ 0.568000] Amd/Fujitsu Extended Query Table at 0x0040[ 0.572000] Amd/Fujitsu Extended Query version 1.3.[ 0.580000] number of CFI chips: 1[ 0.580000] 4 ofpart partitions found on MTD device ltq_nor[ 0.588000] Creating 4 MTD partitions on "ltq_nor":[ 0.592000] 0x000000000000-0x000000060000 : "uboot"[ 0.600000] 0x000000060000-0x000000080000 : "uboot_cfg"[ 0.604000] 0x000000080000-0x000001f80000 : "firmware"[ 0.608000] 0x0000001b137f-0x000001f80000 : "rootfs"[ 0.612000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only[ 0.628000] mtd: device 3 (rootfs) set to be root filesystem[ 0.632000] mtd: partition "rootfs_data" created automatically, ofs=0x400000, len=0x1b80000[ 0.640000] 0x000000400000-0x000001f80000 : "rootfs_data"[ 0.664000] 0x000001f80000-0x000002000000 : "boardconfig"[ 0.776000] libphy: lantiq,xrx200-mdio: probed[ 0.784000] net-xrx200: invalid MAC, using random[ 0.788000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)[ 0.796000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)[ 0.804000] eth0: attached PHY [Lantiq XWAY PEF7071 v1.5] (phy_addr=0:00, irq=-1)[ 0.812000] wdt 1f8803f0.watchdog: Init done[ 0.816000] leds-gpio gpio-leds.7: pins are not configured from the driver[ 0.824000] TCP: cubic registered[ 0.828000] NET: Registered protocol family 17[ 0.832000] 8021q: 802.1Q VLAN Support v1.8[ 0.844000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.[ 0.852000] Freeing unused kernel memory: 188K (80371000 - 803a0000)procd: Console is aliveprocd: - watchdog -procd: - preinit -Press the [f] key and hit [enter] to enter failsafe modePress the [1], [2], [3] or [4] key and hit [enter] to select the debug level[ 4.496000] SCSI subsystem initialized[ 4.508000] IFXUSB: ifxusb_hcd: version 3.2 B110801[ 4.512000] Chip Version :000b BurstSize=4[ 5.116000] IFXUSB: USB core #0 soft-reset[ 5.416000] IFXUSB: USB core #0 soft-reset[ 5.420000] ifxusb_hcd ifxusb_hcd: IFX USB Controller[ 5.424000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1[ 5.432000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000[ 5.440000] IFXUSB: Init: Power Port (0)[ 5.452000] hub 1-0:1.0: USB hub found[ 5.452000] hub 1-0:1.0: 1 port detected[ 5.956000] IFXUSB: USB core #1 soft-reset[ 6.260000] IFXUSB: USB core #1 soft-reset[ 6.264000] ifxusb_hcd ifxusb_hcd: IFX USB Controller[ 6.268000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 2[ 6.276000] ifxusb_hcd ifxusb_hcd: irq 91, io mem 0xbe106000[ 6.280000] IFXUSB: Init: Power Port (0)[ 6.292000] hub 2-0:1.0: USB hub found[ 6.292000] hub 2-0:1.0: 1 port detected[ 6.296000] ifxusb_hcd ifxusb_hcd: requested GPIO 232[ 6.312000] usbcore: registered new interface driver usb-storage[ 6.592000] usb 1-1: new high-speed USB device number 2 using ifxusb_hcdmount_root: jffs2 is ready[ 7.540000] jffs2: notice: (268) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 8 of xref (0 dead.procd: - early -procd: - watchdog -procd: - ubus -procd: - init -Please press Enter to activate this console.[ 8.488000] eth0: port 4 got link[ 8.604000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH[ 8.676000] NET: Registered protocol family 10[ 8.692000] NET: Registered protocol family 8[ 8.692000] NET: Registered protocol family 20[ 8.720000] nf_conntrack version 0.5.0 (1971 buckets, 7884 max)[ 8.728000] ip6_tables: (C) 2000-2006 Netfilter Core Team[ 8.760000] MEI CPE Driver, Version 1.2.0[ 8.760000] (c) Copyright 2009, Infineon Technologies AG### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###Lantiq CPE API Driver version: DSL CPE API V4.11.4[ 8.788000] [ 8.788000] Predefined debug level: 2[ 8.796000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093[ 8.804000] Backport generated by backports.git backports-20130802-0-gdb67a3f[ 8.816000] ip_tables: (C) 2000-2006 Netfilter Core Team[ 8.836000] ATM1.0.26 ATM (A1) firmware version 0.24[ 8.840000] ifxmips_atm: ATM init succeed[ 8.912000] xt_time: kernel timezone is -0000[ 8.936000] cfg80211: Calling CRDA to update world regulatory domain[ 8.944000] cfg80211: World regulatory domain updated:[ 8.948000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 8.956000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)[ 8.964000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)[ 8.972000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)[ 8.980000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)[ 8.988000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)[ 8.992000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)[ 9.056000] PPP generic driver version 2.4.2[ 9.060000] NET: Registered protocol family 24[ 9.304000] usb 1-1: reset high-speed USB device number 2 using ifxusb_hcd[ 9.504000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected[ 9.596000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected[ 9.620000] usbcore: registered new interface driver rt2800usb[ 9.648000] usbcore: registered new interface driver ath9k_htc[ 15.748000] device eth0 entered promiscuous mode[ 15.752000] br-lan: port 1(eth0) entered forwarding state[ 15.756000] br-lan: port 1(eth0) entered forwarding stateprocd: - init complete -[ 17.760000] br-lan: port 1(eth0) entered forwarding state

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies

[OpenWrt Wiki] Astoria Networks / Arcadyan ARV7519RW22-A-LT (Orange Livebox 2.1) (2024)
Top Articles
Latest Posts
Article information

Author: Lilliana Bartoletti

Last Updated:

Views: 5902

Rating: 4.2 / 5 (73 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Lilliana Bartoletti

Birthday: 1999-11-18

Address: 58866 Tricia Spurs, North Melvinberg, HI 91346-3774

Phone: +50616620367928

Job: Real-Estate Liaison

Hobby: Graffiti, Astronomy, Handball, Magic, Origami, Fashion, Foreign language learning

Introduction: My name is Lilliana Bartoletti, I am a adventurous, pleasant, shiny, beautiful, handsome, zealous, tasty person who loves writing and wants to share my knowledge and understanding with you.